Wiki source code of Zūm Discovery

Version 43.1 by Craig Lewis on 2025/09/25 20:36

version	line-number	content
15.1	1	(% class="box errormessage" %)
	2	(((
42.1	3	IMPORTANT: When using ShowRunnerCLC™ with a ZUM-HUB4, do not discover Zūm Rooms using the Crestron HUB4 Web UI. During discovery, the HUB4 will claim ZUMNET-JBOXs and prevent ShowRunnerCLC™ from auto-discovering or registering the Zūm hardware for itself.
23.1	4
22.1	5	WARNING: Cresnet Discovery is non-functional for ZUMNET-JBOXs with certain versions of Crestron Device Database.
	6	ShowRunnerCLC™ versions v3.019 through v3.041 must be either downgraded to v3.018 or upgraded to v3.042 or newer in order to perform auto-discover functions.
15.1	7	)))
16.1	8
1.1	9	(% class="box warningmessage" %)
	10	(((
24.1	11	This article is about automatically building a ShowRunnerCLC™ configuration using the Zūm Discovery feature of ShowRunnerCLC™. For instructions on configuring Zūm Wired rooms using the Crestron Zūm App, see [[this page>>SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Preparation.Zūm App Overview.WebHome]].
1.1	12	For instructions on configuring Zūm Net devices using Crestron Toolbox, see [[this page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUMNET-JBOX Setup.WebHome]].
	13	)))
	14
	15	{{box cssClass="floatinginfobox" title="CONTENTS"}}
	16	{{toc/}}
	17	{{/box}}
	18
19.1	19	If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a ShowRunnerCLC™ configuration file using the Zūm Discovery feature that is built into ShowRunnerCLC™.
1.1	20
19.1	21	There are certain pre-requisites and limitations when building a ShowRunnerCLC™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
1.1	22
34.1	23	= Discovery Filter (ShowRunnerCLC™ 3.062 or newer) =
33.1	24
	25	Discovered ethernet devices may be filtered using either a hostname or IP Address filter. The filter is configured from the command line interface.
	26
	27	##+~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-+~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-+
	28	~\| Command \| Help \|
	29	~\|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-\|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-\|
	30	~\| SR discover clear filter \| Remove Discovery Filter \|
	31	~\| SR discover filter \| Show Discovery Filter \|
	32	~\| SR discover filter (X:S) \| Set Discovery Filter \|
	33	~\| - \| (X):S:Filter String \|
	34	~\|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-\|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-\|##
	35
	36	=== Hostname Filter ===
	37
34.1	38	The Hostname filter uses a regular expression to filter discovered ZUMNET GATEWAYs or JBOXs. Multiple expressions can be applied by using a comma to separate the expressions.
33.1	39
	40	Command Syntax: ##"Type='Hostname' Settings='Expr1[,Expr2]'"##
	41
	42	Examples:
	43
	44	1. Only include hostnames that start with ZUMNET-06:
34.1	45	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='Hostname' Settings='^ZUMNET-06'"
33.1	46	1. Include hostnames that start with ZUMNET-FL01 or contain FL03:
34.1	47	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='Hostname' Settings='^ZUMNET-FL01,FL03'"
33.1	48
34.1	49	=== IP Address Filter ===
	50
	51	The IP Address filter will restrict discovered ZUMNET GATEWAYs or JBOXs to matching IP Addresses or IP Address ranges. Multiple addresses and ranges can be used.
	52
	53	Command Syntax: ##"Type='IPAddress' Settings='Address[,AddressStart-AddressEnd]'"##
	54
	55	Examples:
	56
	57	1. Only include a device with an address of 192.168.0.10 or 192.168.0.50:
	58	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='IPAddress' Settings='192.168.0.10,192.168.0.50'"
	59	1. Include addresses between 192.168.0.11 and 192.168.0.50 and 192.168.0.200 and 192.168.0.240:
	60	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='IPAddress' Settings='192.168.0.11-192.168.0.50,192.168.0.200-192.168.0.240'"
	61
37.1	62	=== IP-ID Filter (Added in SR v3.067) ===
	63
	64	The IP-ID filter will restrict discovered ZUMNET GATEWAYs or JBOXs to matching IP-IDs or IP-ID ranges. Multiple IDs and ranges can be used.
	65
	66	Command Syntax: ##"Type='IPID' Settings='IPID[,IPIDStart-IPIDEnd]'"##
	67
	68	Examples:
	69
	70	1. Only include a device with an IP-ID of 10 or 5A:
	71	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='IPID' Settings='10,5A'"
	72	1. Include addresses between 11 and 4F and A0 and BF:
	73	(% style="font-family:Menlo,Monaco,Consolas,Courier New,monospace; white-space:pre" %)sr discover filter "Type='IPID' Settings='11-4F,A0-BF'"
	74
5.2	75	= Zūm Wired Discovery =
	76
6.1	77	== Notes and Limitations ==
1.1	78
15.1	79	(% class="box warningmessage" %)
9.1	80	(((
19.1	81	* ShowRunnerCLC™ version 3.014 or newer required
13.1	82	* Zūm Wired firmware .puf version 1.02.10 or greater required (ZUMNET-JBOX installed minimum version 1.001.00081)
30.1	83	* Disconnect from any ZUMNET devices you may be connected to in Toolbox and confirm all hardware (NETs and LINKs) are online prior to running the discovery commands
6.2	84	* Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
31.1	85	* ZUMLINK-IOs will not be discovered (Expected to be discoverable in future ShowRunnerCLC™ release)
32.1	86	* ZUMLINK-KPs will not be discovered on older versions of ShowRunnerCLC™ (v3.058 or newer will discover keypads and set as remote type)
6.2	87	* One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
43.1	88	* ZUMNET-JBOX-DALI will be created with only 1 broadcast load index 17. If ZUMNET is being setup as a LEGACY controller, the config will need to be updated to reflect the model as ZUMNET-JBOX-DALI-LEGACY.
9.1	89	)))
6.1	90
6.2	91	== Steps ==
	92
19.1	93	1. [[Install ShowRunner™>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.WebHome]] on the processor and configure the processor as necessary
7.1	94	1*. Note that while Zūm Wired discovery will build a configuration, if a configuration file was provided then it should still be loaded as it may contain location data or non-Zūm devices.
	95	1. If the ZUMNET-JBOX firmware is too out-of-date to connect using the Crestron Zūm App, then there are some additional steps required:
	96	1*. Connect to the first ZUMNET-JBOX in Toolbox
	97	1*. Configure a static IP address for the ZUMNET-JBOX if there is no DHCP server on the network
19.1	98	1**. Note: The ShowRunnerCLC™ built-in DHCP server is not meant to be used in production
	99	1**. If the ShowRunnerCLC™ built-in DHCP server was used to assign IP addresses to devices, it is still necessary to give those devices static IP addresses
7.1	100	1*. Set unique Connection IDs for each device hosted on the ZUMNET-JBOX so that their firmware can be updated
	101	1*. Load the Zūm Wired firmware to the ZUMNET-JBOX
	102	1*. Repeat the above steps for all ZUMNET-JBOXs
8.1	103	1*. Once all the ZUMNET-JBOXs have pushed the new firmware to their hosted devices, disconnect from them in Toolbox and proceed to the next step
24.2	104	1. Connect to each ZUMNET-JBOX in the Crestron Zūm App
	105	1*. Commission room through the app
	106	1**. configure keypad logic
	107	1**. configure occupancy sensor settings
	108	1**. calibrate photocell(s)
24.3	109	1*. Set hostnames for the ZUMNETs.
	110	1**. Zūm discovery will bring in hostnames.
7.1	111	1. Unique Connection IDs should be automatically assigned to any Zūm Link and Cresnet devices on the ZUMNET-JBOX
	112	1*. If firmware was out-of-date, then this step should have already been completed
	113	1*. If unique CIDs are not automatically assigned, connect to the JBOX in Toolbox and give the devices unique CIDs
	114	1. Configure a static IP address for the ZUMNET-JBOX if there is no DHCP server on the network
	115	1*. If firmware was out-of-date, then this step should have already been completed
19.1	116	1*. Note: The ShowRunnerCLC™ built-in DHCP server is not meant to be used in production
	117	1*. If the ShowRunnerCLC™ built-in DHCP server was used to assign IP addresses to devices, it is still necessary to give those devices static IP addresses
7.1	118	1. Optionally, manually configure the ZUMNET-JBOX IP table to point at the processor if you want to keep track of which ZUMNET-JBOX is at each IP-ID
	119	1*. If you do not manually configure the IP table, then SHOWRUNNER™ will automatically configure the IP-ID for each ZUMNET-JBOX during discovery
13.1	120	1. Set the ZUMNET-JBOX into either Zūm ("App") mode or CNET mode as required for the program
19.1	121	1*. Full control from ShowRunnerCLC™ is only possible if all ZUMNET-JBOXs are in CNET mode. Odd behavior may result from conflicts between ShowRunnerCLC™ and internal logic if the ZUMNET-JBOXs are not put into CNET mode
	122	1. Repeat from step 3 until all ZUMNET-JBOXs that are to be controlled by ShowRunnerCLC™ have static IP addresses and unique CIDs for any hosted devices
8.1	123	1. Disconnect from any ZUMNET-JBOXs and then connect to the processor in Toolbox
36.1	124	1. If trying to Auto Discover on a job with multiple processors or you are returning to a job where new ZUMNET-JBOXs have been added and you only wish to Auto Discover those new devices, ShowRunnerCLC™ 3.062 and newer allow [[filtering based on hostname or IP address>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Program Configuration.Zūm Discovery.WebHome\|\|anchor="HDiscoveryFilter28ShowRunnerCLC21223.062ornewer29"]] in order to limit the devices that are brought into the ShowRunnerCLC™ configuration
38.1	125	1. Run the command: ##sr discover zumnet true true## to add ZUMNET-JBOXs, connected ZUMLINK devices, and some Cresnet devices (such as Cameo keypads) to the configuration. (Note
	126	1*. This command will update the ShowRunnerCLC™ configuration with:
	127	1**. One area per claimed ZUMNET-JBOX based on the Room Name set in the app
	128	1**. One ZUMNET-BRIDGE load controller per claimed ZUMNET-JBOX to allow the Zūm Room to communicate its current status (scene, occupancy, etc.) to ShowRunnerCLC™
	129	1**. One entry for each ZUMLINK-KP, ZUMLINK-JBOX, and ZUMLINK occupancy sensor connected to each ZUMNET-JBOX
	130	1***. All devices and loads will be auto-labeled based on their connection information, //not// the names they are given in the Zūm App
	131	1***. Keypads will be brought in as "Remote" type and only follow the logic as defined in the Zūm App, allowing for scheduled enabling/disabling of keypads without adding any additional button functions from ShowRunnerCLC™
	132	1***. Occupancy sensors will be brought in with "Use Hardware Logic" and only follow the logic as defined in the Zūm App
	133	1. Optionally, run ##sr discover zumnet false true## to only add new ZUMLINK devices to the configuration. Note that previously added ZUMLINK devices will be added again if their CID has been changed*
	134	1. Run ##sr discover zumnet true false## to add ZUMNET-JBOXs without bringing in any devices. Note that if a ZUMNET-JBOX already has an entry in its IP Table, ShowRunnerCLC™ will not claim it.* The ZUMNET-JBOX's IP Table must be cleared in order for it to be claimed by the ShowRunnerCLC™ program
14.1	135	1. If all steps have been performed successfully, then you should be able to use the ##sr show area##, ##sr show load##, ##sr show keypad##, and ##sr show occ## commands to see that the ZUMNET and ZUMLINK hardware has been discovered correctly.
35.1	136	1. If new Zūm Link hardware has been added, it is not necessary to do a full Auto Discovery to bring the new devices into ShowRunnerCLC™; instead you can just run ##sr discover zumnet false true## to bring in the new Zūm Link devices without claiming any new Zūm Net devices
6.2	137
5.2	138	= Zūm Wireless Discovery =
1.1	139
5.2	140	== Notes and Limitations ==
1.1	141
16.2	142	(% class="box warningmessage" %)
9.1	143	(((
41.1	144	* Newer GWEXER firmware enables SSL by default. Follow the instructions at [[SSL User Configuration>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.SSL User Configuration.WebHome]] and manually add the IP Table entries on the GWEXER
19.1	145	* Processor with ShowRunnerCLC™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
	146	For ShowRunnerCLC™ versions prior to 3.014 and newer, replace ##sr discover zummesh## commands with ##sr discover zum##**
6.1	147	* ZUM-NETBRIDGES must already be acquired to their respective gateway
19.1	148	* ShowRunnerCLC™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
6.1	149	* Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
19.1	150	* Plug loads will not appear in the ShowRunnerCLC™ UI
4.1	151	)))
1.1	152
16.2	153	(% class="box infomessage" id="HCaution:" %)
3.1	154	(((
19.1	155	Note: ShowRunnerCLC™ has two different approaches for Zūm Wireless Discovery
4.1	156
19.1	157	1. Manual RF Gateway Assignment - ShowRunnerCLC™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
	158	1. Claim All RF Gateways - ShowRunnerCLC™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. DO NOT use this method if there are gateways used by different ShowRunnerCLC™ or other Crestron systems on the same local network.
3.1	159	)))
1.1	160
40.1	161	(% class="box errormessage" id="HCaution:" %)
	162	(((
	163	Note: Due to what is believed to be an SSL issue, ShowRunnerCLC™ will sometimes fail to acquire Zūm Wireless gateways with the ##sr discover zummesh true## or ##sr ethernet device claim [Hostname]## commands.
	164
	165	To work around this issue, Zūm Wireless gateways need to be added to the "IpDevices" section of the SrConfig.json and then have their IP Tables manually updated using the ##addm [IP-ID] [Processor IP]## command. Once this has been done, the ##sr discover zummesh false## commands can be run as normal.
	166
	167	Below is an example "IpDevices" section of a config with three gateways defined. Serial numbers are optional and can be deleted if not known. Note: the "IpId" here is decimal, whereas the actual IP-ID that is assigned from Text Console is in hexadecimal. You will need to convert between the two: e.g. decimal "48" corresponds to hexadecimal "30", decimal "74" would correspond to hexadecimal "4A", etc.
	168
	169	{{{ "Eiscs": [],
	170	"IpDevices": [
	171	{
	172	"Model": "CEN-GWEXER",
	173	"Name": "GW-1-1",
	174	"SerialNumber": "2402NEJ03956",
	175	"IpId": 48
	176	},
	177	{
	178	"Model": "CEN-GWEXER",
	179	"Name": "GW-1-2",
	180	"SerialNumber": "2402NEJ03862",
	181	"IpId": 49
	182	},
	183	{
	184	"Model": "CEN-GWEXER",
	185	"Name": "GW-2-1",
	186	"SerialNumber": "2402NEJ03887",
	187	"IpId": 50
	188	}
	189	],
	190	"Keyswitches": [],}}}
	191	)))
	192
6.2	193	== Manual RF Gateway Assignment Instructions ==
1.1	194
19.1	195	Use this method if you have multiple ShowRunnerCLC™ instances on the same network or have gateways used by other Crestron systems.
1.1	196
2.1	197	* Connect to the processor's console with Toolbox or your favorite SSH client.
9.1	198	* Type ##sr devmgr ethernet query## and press enter. This queries the local network for RF Gateways.
	199	* Type ##sr devmgr ethernet show devices## and press enter. This displays all found Crestron ethernet devices.
19.1	200	* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type ##sr ethernet device claim CEN-GWEXER-9E6ADA##. ShowRunnerCLC™ will auto-assign an IP-ID. After all gateways have been claimed by ShowRunnerCLC™, proceed to the next step.
9.1	201	* Type ##sr discover zummesh false## and press enter.
5.1	202	* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
19.1	203	* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunnerCLC™ must be restarted to complete the acquire process.
	204	* Type ##progreset## and press enter to restart ShowRunnerCLC™
	205	* Once SHOWRUNNER™ has finished restarting type ##sr discover zummesh false## and press enter. ShowRunnerCLC™ will be able to acquire the loads attached to the Zūm rooms at this point.
5.1	206	* Once completed SHOWRUNNER™ is now ready for full Zūm control
2.1	207
6.2	208	== Claim All RF Gateways Instructions ==
2.1	209
19.1	210	Use this method when you have a single ShowRunnerCLC™ instance on a local network with all gateways being used for ShowRunnerCLC™.
2.1	211
	212	* Connect to the processor's console with Toolbox or your favorite SSH client.
38.2	213	* Type ##sr discover zummesh true## and press enter. ShowRunnerCLC™ will auto-assign an IP-ID. After all gateways have been claimed by ShowRunnerCLC™, proceed to the next step.
	214	* Type ##sr discover zummesh false## and press enter.
5.1	215	* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
19.1	216	* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunnerCLC™ must be restarted to complete the acquire process.
	217	* Type ##progreset## and press enter to restart ShowRunnerCLC™
	218	* Once ShowRunnerCLC™ has finished restarting type ##sr discover zummesh false## and press enter. ShowRunnerCLC™ will be able to acquire the loads attached to the Zūm rooms at this point.
	219	* Once completed ShowRunnerCLC™ is now ready for full Zūm control
2.1	220
	221	== Examples ==
	222
5.2	223	=== Manual Example ===
4.1	224
	225	{{{MC4>sr devmgr ethernet query
	226	Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
	227	MC4>sr devmgr ethernet show devices
	228
	229	+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
	230	\| Adapter \| Hostname \| IP Address \| IP-ID \| ID \|
	231	+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
	232	\| EthernetLANAdapter \| CI-SJC-CEN-CI3-1-COM3 \| 10.44.5.20 \| 00 \| CEN-CI3-1-C3COM-3 [v1.1620.00000, #008436E2] type:1 \|
	233	+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
	234	\| EthernetLANAdapter \| SB-DIN-CENCN-2 \| 10.44.5.81 \| 00 \| DIN-CENCN-2-POE [v1.3544.00006, #8AB25AA3] \|
	235	+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
	236	\| EthernetLANAdapter \| CEN-GWEXER-9E6ADA \| 10.44.5.120 \| 00 \| CEN-GWEXER [v1.4230.00015, #848210AD] \|
	237	+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
	238
	239	MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
	240	Claimed ethernet device: CEN-GWEXER-9E6ADA
	241	MC4>Update request from IP-ID-30 in Program 01
9.1	242	MC4>sr discover zummesh false
4.1	243	Starting Zum Discovery without gateway claiming
	244	MC4>Performing Discovery on 1 Gateways.
2.1	245	Evaluating 3 Devices on Gateway 30
	246	Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
	247	Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
	248	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
	249	Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
	250	Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
	251	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
	252	Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
	253	Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
	254	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
4.1	255	Querying cresnet
2.1	256	Discovering Zum Loads on 1 Gateways.
	257	Discovering Zum Loads on 3 Devices.
	258	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	259	Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
	260	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	261	Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
	262	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	263	Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
	264	RF Gateways: 0
	265	RF Devices: 3
	266	New Loads: 0
	267	Modified Loads: 0
	268	Removed Loads: 0
	269	Zum Discovery Finished
	270	MC4>sr save
	271	Saved config
	272	MC4>progreset
	273	...
	274	CI ShowRunner startup completed successfully in 8072ms
9.1	275	MC4>sr discover zummesh false
2.1	276	Starting Zum Discovery without gateway claiming
	277	MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
	278	Performing Discovery on 1 Gateways.
	279	Evaluating 3 Devices on Gateway 30
	280	Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
	281	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
	282	Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
	283	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
	284	Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
	285	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
	286	Discovering Zum Loads on 1 Gateways.
	287	Discovering Zum Loads on 3 Devices.
	288	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	289	Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
	290	Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
	291	Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
	292	Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
	293	Load: Load37615 Added
	294	NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
	295	Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
	296	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	297	Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
	298	Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
	299	Load: Load1154 Added
	300	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
	301	Load: Load0 Added
	302	Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
	303	Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
	304	Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
	305	Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
	306	Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
	307	NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
	308	Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
	309	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	310	Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
	311	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
	312	Load: Load60367 Added
	313	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
	314	Load: Load15553 Added
	315	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
	316	Load: Load63818 Added
	317	NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
	318	Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
	319	RF Gateways: 0
	320	RF Devices: 3
	321	New Loads: 6
	322	Modified Loads: 0
	323	Removed Loads: 0
4.1	324	Zum Discovery Finished}}}
2.1	325
5.1	326	=== Claim All Example ===
2.1	327
9.1	328	{{{MC4>sr discover zummesh true
4.1	329	Starting Zum Discovery with gateway claiming
	330	MC4>Found 1 Gateways to check.
	331	Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
	332	Update request from IP-ID-30 in Program 01
	333	Claimed 1 Gateways. Waiting for queries to finish.
	334	Performing Discovery on 1 Gateways.
2.1	335	Evaluating 3 Devices on Gateway 30
	336	Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
	337	Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
	338	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
	339	Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
	340	Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
	341	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
	342	Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
	343	Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
	344	Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
	345	Discovering Zum Loads on 1 Gateways.
	346	Discovering Zum Loads on 3 Devices.
	347	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	348	Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
	349	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	350	Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
	351	NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
	352	Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
	353	RF Gateways: 0
	354	RF Devices: 3
	355	New Loads: 0
	356	Modified Loads: 0
	357	Removed Loads: 0
	358	Zum Discovery Finished
	359	MC4>sr save
	360	Saved config
	361	MC4>progreset
	362	...
	363	CI ShowRunner startup completed successfully in 8072ms
9.1	364	MC4>sr discover zummesh false
2.1	365	Starting Zum Discovery without gateway claiming
	366	MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
	367	Performing Discovery on 1 Gateways.
	368	Evaluating 3 Devices on Gateway 30
	369	Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
	370	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
	371	Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
	372	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
	373	Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
	374	Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
	375	Discovering Zum Loads on 1 Gateways.
	376	Discovering Zum Loads on 3 Devices.
	377	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	378	Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
	379	Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
	380	Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
	381	Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
	382	Load: Load37615 Added
	383	NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
	384	Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
	385	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	386	Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
	387	Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
	388	Load: Load1154 Added
	389	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
	390	Load: Load0 Added
	391	Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
	392	Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
	393	Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
	394	Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
	395	Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
	396	NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
	397	Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
	398	Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
	399	Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
	400	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
	401	Load: Load60367 Added
	402	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
	403	Load: Load15553 Added
	404	Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
	405	Load: Load63818 Added
	406	NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
	407	Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
	408	RF Gateways: 0
	409	RF Devices: 3
	410	New Loads: 6
	411	Modified Loads: 0
	412	Removed Loads: 0
	413	Zum Discovery Finished
4.1	414	}}}