Skip to Content

Changes for page Zūm Discovery

Last modified by Alexander Mott on 2025/04/03 17:35
From version 6.2
edited by Alexander Mott
on 2022/09/22 23:32
Change comment: There is no comment for this version
To version 5.2
edited by Alexander Mott
on 2022/09/22 22:11
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,39 +10,34 @@
10 10  
11 11  (% class="row" %)
12 12  (((
13 -If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Zūm Discovery feature that is built into SHOWRUNNER™.
13 +If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Autodiscovery feature that is built into SHOWRUNNER™.
14 14  
15 15  There are certain pre-requisites and limitations when building a SHOWRUNNER™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
16 16  
17 17  = Zūm Wired Discovery =
18 18  
19 -== Notes and Limitations ==
19 +Lorem
20 20  
21 -* SHOWRUNNER™ version 3.014 or newer required
22 -* Zūm Wired firmware version 1.02.10 or greater required
23 -* Disconnect from any ZUMNET devices you may be connected to in Toolbox prior to running the discovery commands
24 -* Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
25 -* One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
21 += Zūm Wireless Discovery =
26 26  
27 -== Steps ==
23 +*Disconnect from the gateway before discovery as they cannot support multiple connections*
24 +*Plug loads do not appear in the UI*
28 28  
29 -1.
26 +== Notes and Limitations ==
30 30  
31 -= Zūm Wireless Discovery =
28 +* SHOWRUNNER™ version 2.190 or newer required
29 +* Disconnect from any RF gateways you are connected to prior to running the autodiscovery command,
32 32  
33 -== Notes and Limitations ==
31 +== Pre-Requisites ==
34 34  
35 -* Processor with SHOWRUNNER™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
36 -** For SHOWRUNNER™ versions 3.014 and newer, replace ##sr discover zum## commands with ##sr discover zummesh##
37 -* ZUM-NETBRIDGES must already be acquired to their respective gateway
38 -* SHOWRUNNER™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
39 -* Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
40 -* Plug loads will not appear in the SHOWRUNNER™ UI
33 +* Zum NETBRIDGES acquired to their respective gateway (CEN-GWEXER/ZUMNET-GATEWAY)
34 +* SHOWRUNNER™ installed and running on a 3-series processor on the same network as the gateway
35 +* NETBRIDGES do not need to have addresses assigned. SHOWRUNNER™ will automatically address them. If devices all already addressed then their addresses will be honored.
41 41  )))
42 42  
43 43  (% class="box warningmessage" id="HCaution:" %)
44 44  (((
45 -**Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Discovery
40 +**Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Autodiscovery
46 46  
47 47  1. **Manual RF Gateway Assignment** - SHOWRUNNER™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
48 48  1. **Claim All RF Gateways** - SHOWRUNNER™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different SHOWRUNNER™ or other Crestron systems on the same local network.
... ... @@ -50,7 +50,7 @@
50 50  
51 51  (% class="row" %)
52 52  (((
53 -== Manual RF Gateway Assignment Instructions ==
48 +== Manual RF Gateway Assignment ==
54 54  
55 55  Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
56 56  
... ... @@ -65,7 +65,7 @@
65 65  * Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
66 66  * Once completed SHOWRUNNER™ is now ready for full Zūm control
67 67  
68 -== Claim All RF Gateways Instructions ==
63 +== Claim All RF Gateways ==
69 69  
70 70  Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
71 71