Changes for page Zūm Discovery

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,34 +10,39 @@
10	10
11	11	(% class="row" %)
12	12	(((
13		-If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Autodiscovery feature that is built into SHOWRUNNER™.
	13	+If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Zūm Discovery feature that is built into SHOWRUNNER™.
14	14
15	15	There are certain pre-requisites and limitations when building a SHOWRUNNER™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
16	16
17	17	= Zūm Wired Discovery =
18	18
19		-Lorem
	19	+== Notes and Limitations ==
20	20
21		-= Zūm Wireless Discovery =
	21	+* SHOWRUNNER™ version 3.014 or newer required
	22	+* Zūm Wired firmware version 1.02.10 or greater required
	23	+* Disconnect from any ZUMNET devices you may be connected to in Toolbox prior to running the discovery commands
	24	+* Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
	25	+* One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
22	22
23		-*Disconnect from the gateway before discovery as they cannot support multiple connections*
24		-*Plug loads do not appear in the UI*
	27	+== Steps ==
25	25
26		-== Notes and Limitations ==
	29	+1.
27	27
28		-* SHOWRUNNER™ version 2.190 or newer required
29		-* Disconnect from any RF gateways you are connected to prior to running the autodiscovery command,
	31	+= Zūm Wireless Discovery =
30	30
31		-== Pre-Requisites ==
	33	+== Notes and Limitations ==
32	32
33		-* Zum NETBRIDGES acquired to their respective gateway (CEN-GWEXER/ZUMNET-GATEWAY)
34		-* SHOWRUNNER™ installed and running on a 3-series processor on the same network as the gateway
35		-* NETBRIDGES do not need to have addresses assigned. SHOWRUNNER™ will automatically address them. If devices all already addressed then their addresses will be honored.
	35	+* Processor with SHOWRUNNER™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
	36	+** For SHOWRUNNER™ versions 3.014 and newer, replace ##sr discover zum## commands with ##sr discover zummesh##
	37	+* ZUM-NETBRIDGES must already be acquired to their respective gateway
	38	+* SHOWRUNNER™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
	39	+* Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
	40	+* Plug loads will not appear in the SHOWRUNNER™ UI
36	36	)))
37	37
38	38	(% class="box warningmessage" id="HCaution:" %)
39	39	(((
40		-**Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Autodiscovery
	45	+**Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Discovery
41	41
42	42	1. **Manual RF Gateway Assignment** - SHOWRUNNER™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
43	43	1. **Claim All RF Gateways** - SHOWRUNNER™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different SHOWRUNNER™ or other Crestron systems on the same local network.
...	...	@@ -45,7 +45,7 @@
45	45
46	46	(% class="row" %)
47	47	(((
48		-== Manual RF Gateway Assignment ==
	53	+== Manual RF Gateway Assignment Instructions ==
49	49
50	50	Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
51	51
...	...	@@ -60,7 +60,7 @@
60	60	* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
61	61	* Once completed SHOWRUNNER™ is now ready for full Zūm control
62	62
63		-== Claim All RF Gateways ==
	68	+== Claim All RF Gateways Instructions ==
64	64
65	65	Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
66	66