Skip to Content

Changes for page Zūm Discovery

Last modified by Alexander Mott on 2025/04/03 17:35
From version 5.1
edited by Alexander Mott
on 2022/09/22 21:55
Change comment: There is no comment for this version
To version 4.1
edited by Alexander Mott
on 2022/09/22 21:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = Zūm Wireless =
20 20  
21 +
21 21  As of version 2.190 ShowRunner can discover RF Gateways and attached Zum NETBRIDGES. ShowRunner will find all devices, set them up, create areas and loads.
22 22  *Disconnect from the gateway before discovery as they cannot support multiple connections*
23 23  *Plug loads do not appear in the UI*
... ... @@ -25,8 +25,8 @@
25 25  == Pre-Requisites: ==
26 26  
27 27  * Zum NETBRIDGES acquired to their respective gateway (CEN-GWEXER/ZUMNET-GATEWAY)
28 -* SHOWRUNNER™ installed and running on a 3-series processor on the same network as the gateway
29 -* NETBRIDGES do not need to have addresses assigned. SHOWRUNNER™ will automatically address them. If devices all already addressed then their addresses will be honored.
29 +* ShowRunner installed and running on a 3-series processor on the same network as the gateway
30 +* NETBRIDGES do not need to have addresses assigned. ShowRunner will automatically address them. If devices all already addressed then their addresses will be honored.
30 30  )))
31 31  
32 32  (% class="box warningmessage" id="HCaution:" %)
... ... @@ -39,37 +39,38 @@
39 39  
40 40  (% class="row" %)
41 41  (((
42 -== Manual RF Gateway Claiming ==
43 +== Option 1: Manual RF Gateway Claiming: ==
43 43  
44 -Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
45 +Use this method if you have multiple ShowRunner instances on the same network or have gateways used by other Crestron systems.
45 45  
46 46  * Connect to the processor's console with Toolbox or your favorite SSH client.
47 47  * Type "//sr devmgr ethernet query//" and press enter. This queries the local network for RF Gateways.
48 48  * Type "//sr devmgr ethernet show devices//" and press enter. This displays all found Crestron ethernet devices.
49 -* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". SHOWRUNNER™ will auto-assign an IP-ID. After all gateways have been claimed by SHOWRUNNER™, proceed to the next step.
50 +* For each gateway that you'd like this instance of ShowRunner to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". ShowRunner will auto-assign an IP-ID. After all gateways have been claimed by ShowRunner proceed to the next step.
50 50  * Type "//sr discover zum false//" and press enter.
51 -* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
52 -* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
53 -* Type "//progreset//" and press enter to restart SHOWRUNNER™
54 -* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
55 -* Once completed SHOWRUNNER™ is now ready for full Zūm control
52 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
53 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunner must be restarted to complete the acquire process.
54 +* Type "//progreset//" and press enter to restart ShowRunner
55 +* Once ShowRunner has finished restarting type "//sr discover zum false//" and press enter. ShowRunner will be able to acquire the loads attached to the Zum rooms at this point.
56 +* Once completed ShowRunner is now ready for full Zum control
56 56  
57 -== Claim All RF Gateways ==
58 +== Option 2: Claim All Gateways: ==
58 58  
59 -Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
60 +Use this method when you have a single ShowRunner instance on a local network with all gateways being used for ShowRunner.
60 60  
61 61  * Connect to the processor's console with Toolbox or your favorite SSH client.
62 62  * Type "//sr discover zum true//" and press enter.
63 -* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
64 -* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
65 -* Type "//progreset//" and press enter to restart SHOWRUNNER™
66 -* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
67 -* Once completed SHOWRUNNER™ is now ready for full Zūm control
64 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
65 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunner must be restarted to complete the acquire process.
66 +* Type "//progreset//" and press enter to restart ShowRunner
67 +* Once ShowRunner has finished restarting type "//sr discover zum false//" and press enter. ShowRunner will be able to acquire the loads attached to the Zum rooms at this point.
68 +* Once completed ShowRunner is now ready for full Zum control
68 68  
69 69  == Examples ==
70 70  
71 -=== Claim Selectively (Manual) Example ===
72 72  
73 +=== Example for Option 1: ===
74 +
73 73  {{{MC4>sr devmgr ethernet query
74 74  Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
75 75  MC4>sr devmgr ethernet show devices
... ... @@ -171,7 +171,7 @@
171 171  Removed Loads: 0
172 172  Zum Discovery Finished}}}
173 173  
174 -=== Claim All Example ===
176 +=== Example for Option 2: ===
175 175  
176 176  {{{MC4>sr discover zum true
177 177  Starting Zum Discovery with gateway claiming