Skip to Content

Changes for page Zūm Discovery

Last modified by Alexander Mott on 2025/04/03 17:35
From version 40.1
edited by Alexander Mott
on 2025/04/03 17:35
Change comment: There is no comment for this version
To version 38.1
edited by Alexander Mott
on 2025/02/21 18:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -157,38 +157,6 @@
157 157  1. **Claim All RF Gateways** - ShowRunnerCLC™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different ShowRunnerCLC™ or other Crestron systems on the same local network.
158 158  )))
159 159  
160 -(% class="box errormessage" id="HCaution:" %)
161 -(((
162 -**Note:** Due to what is believed to be an SSL issue, ShowRunnerCLC™ will sometimes fail to acquire Zūm Wireless gateways with the ##sr discover zummesh true## or ##sr ethernet device claim [Hostname]## commands.
163 -
164 -To work around this issue, Zūm Wireless gateways need to be added to the "IpDevices" section of the SrConfig.json and then have their IP Tables manually updated using the ##addm [IP-ID] [Processor IP]## command. Once this has been done, the ##sr discover zummesh false## commands can be run as normal.
165 -
166 -Below is an example "IpDevices" section of a config with three gateways defined. Serial numbers are optional and can be deleted if not known. **Note:**  the "IpId" here is decimal, whereas the actual IP-ID that is assigned from Text Console is in hexadecimal. You will need to convert between the two: e.g. decimal "48" corresponds to hexadecimal "30", decimal "74" would correspond to hexadecimal "4A", etc.
167 -
168 -{{{ "Eiscs": [],
169 - "IpDevices": [
170 - {
171 - "Model": "CEN-GWEXER",
172 - "Name": "GW-1-1",
173 - "SerialNumber": "2402NEJ03956",
174 - "IpId": 48
175 - },
176 - {
177 - "Model": "CEN-GWEXER",
178 - "Name": "GW-1-2",
179 - "SerialNumber": "2402NEJ03862",
180 - "IpId": 49
181 - },
182 - {
183 - "Model": "CEN-GWEXER",
184 - "Name": "GW-2-1",
185 - "SerialNumber": "2402NEJ03887",
186 - "IpId": 50
187 - }
188 - ],
189 - "Keyswitches": [],}}}
190 -)))
191 -
192 192  == Manual RF Gateway Assignment Instructions ==
193 193  
194 194  Use this method if you have multiple ShowRunnerCLC™ instances on the same network or have gateways used by other Crestron systems.
... ... @@ -209,8 +209,7 @@
209 209  Use this method when you have a single ShowRunnerCLC™ instance on a local network with all gateways being used for ShowRunnerCLC™.
210 210  
211 211  * Connect to the processor's console with Toolbox or your favorite SSH client.
212 -* Type ##sr discover zummesh true## and press enter. ShowRunnerCLC™ will auto-assign an IP-ID. After all gateways have been claimed by ShowRunnerCLC™, proceed to the next step.
213 -* Type ##sr discover zummesh false## and press enter.
180 +* Type ##sr discover zummesh true## and press enter.
214 214  * Status messages and the results will be displayed on the console. The process should take about 3 minutes.
215 215  * When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunnerCLC™ must be restarted to complete the acquire process.
216 216  * Type ##progreset## and press enter to restart ShowRunnerCLC™