Skip to Content

Changes for page Zūm Discovery

Last modified by Austin Weygandt on 2025/05/02 20:21
From version 3.1
edited by Alexander Mott
on 2022/09/22 21:47
Change comment: There is no comment for this version
To version 5.1
edited by Alexander Mott
on 2022/09/22 21:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -18,7 +18,6 @@
18 18  
19 19  = Zūm Wireless =
20 20  
21 -
22 22  As of version 2.190 ShowRunner can discover RF Gateways and attached Zum NETBRIDGES. ShowRunner will find all devices, set them up, create areas and loads.
23 23  *Disconnect from the gateway before discovery as they cannot support multiple connections*
24 24  *Plug loads do not appear in the UI*
... ... @@ -26,54 +26,71 @@
26 26  == Pre-Requisites: ==
27 27  
28 28  * Zum NETBRIDGES acquired to their respective gateway (CEN-GWEXER/ZUMNET-GATEWAY)
29 -* ShowRunner installed and running on a 3-series processor on the same network as the gateway
30 -* NETBRIDGES do not need to have addresses assigned. ShowRunner will automatically address them. If devices all already addressed then their addresses will be honored.
28 +* SHOWRUNNER™ installed and running on a 3-series processor on the same network as the gateway
29 +* NETBRIDGES do not need to have addresses assigned. SHOWRUNNER™ will automatically address them. If devices all already addressed then their addresses will be honored.
30 +)))
31 31  
32 32  (% class="box warningmessage" id="HCaution:" %)
33 33  (((
34 -**Note,** SHOWRUNNER has two different types of Zum Wireless autodiscovery:
35 -1. Claim All RF Gateways - ShowRunner will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own.  DO NOT use this method if there are gateways used by different ShowRunner or other Crestron systems on the same local network.
36 -1. Manual RF Gateway Assignment - ShowRunner can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
34 +**Note:** SHOWRUNNER™ has two different approaches for Zūm Wireless Autodiscovery
35 +
36 +1. **Manual RF Gateway Assignment** - SHOWRUNNER™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
37 +1. **Claim All RF Gateways** - SHOWRUNNER™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different SHOWRUNNER™ or other Crestron systems on the same local network.
37 37  )))
38 38  
39 -== Option 1: Claim All Gateways: ==
40 +(% class="row" %)
41 +(((
42 +== Manual RF Gateway Claiming ==
40 40  
41 -Use this method when you have a single ShowRunner instance on a local network with all gateways being used for ShowRunner.
44 +Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
42 42  
43 43  * Connect to the processor's console with Toolbox or your favorite SSH client.
44 -* Type "//sr discover zum true//" and press enter.
45 -* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
46 -* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunner must be restarted to complete the acquire process.
47 -* Type "//progreset//" and press enter to restart ShowRunner
48 -* Once ShowRunner has finished restarting type "//sr discover zum false//" and press enter. ShowRunner will be able to acquire the loads attached to the Zum rooms at this point.
49 -* Once completed ShowRunner is now ready for full Zum control
47 +* Type "//sr devmgr ethernet query//" and press enter. This queries the local network for RF Gateways.
48 +* Type "//sr devmgr ethernet show devices//" and press enter. This displays all found Crestron ethernet devices.
49 +* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". SHOWRUNNER™ will auto-assign an IP-ID. After all gateways have been claimed by SHOWRUNNER™, proceed to the next step.
50 +* Type "//sr discover zum false//" and press enter.
51 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
52 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
53 +* Type "//progreset//" and press enter to restart SHOWRUNNER™
54 +* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
55 +* Once completed SHOWRUNNER™ is now ready for full Zūm control
50 50  
51 -== Option 2: Manual RF Gateway Claiming: ==
57 +== Claim All RF Gateways ==
52 52  
53 -Use this method if you have multiple ShowRunner instances on the same network or have gateways used by other Crestron systems.
59 +Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
54 54  
55 55  * Connect to the processor's console with Toolbox or your favorite SSH client.
56 -* Type "//sr devmgr ethernet query//" and press enter. This queries the local network for RF Gateways.
57 -* Type "//sr devmgr ethernet show devices//" and press enter. This displays all found Crestron ethernet devices.
58 -* For each gateway that you'd like this instance of ShowRunner to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". ShowRunner will auto-assign an IP-ID. After all gateways have been claimed by ShowRunner proceed to the next step.
59 -* Type "//sr discover zum false//" and press enter.
60 -* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
61 -* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunner must be restarted to complete the acquire process.
62 -* Type "//progreset//" and press enter to restart ShowRunner
63 -* Once ShowRunner has finished restarting type "//sr discover zum false//" and press enter. ShowRunner will be able to acquire the loads attached to the Zum rooms at this point.
64 -* Once completed ShowRunner is now ready for full Zum control
62 +* Type "//sr discover zum true//" and press enter.
63 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
64 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
65 +* Type "//progreset//" and press enter to restart SHOWRUNNER™
66 +* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
67 +* Once completed SHOWRUNNER™ is now ready for full Zūm control
65 65  
66 66  == Examples ==
67 67  
68 -=== Example for Option 1: ===
71 +=== Claim Selectively (Manual) Example ===
69 69  
70 -{{{MC4>sr discover zum true
71 -Starting Zum Discovery with gateway claiming
72 -MC4>Found 1 Gateways to check.
73 -Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
74 -Update request from IP-ID-30 in Program 01
75 -Claimed 1 Gateways. Waiting for queries to finish.
76 -Performing Discovery on 1 Gateways.
73 +{{{MC4>sr devmgr ethernet query
74 +Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
75 +MC4>sr devmgr ethernet show devices
76 +
77 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
78 +| Adapter | Hostname | IP Address | IP-ID | ID |
79 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
80 +| EthernetLANAdapter | CI-SJC-CEN-CI3-1-COM3 | 10.44.5.20 | 00 | CEN-CI3-1-C3COM-3 [v1.1620.00000, #008436E2] type:1 |
81 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
82 +| EthernetLANAdapter | SB-DIN-CENCN-2 | 10.44.5.81 | 00 | DIN-CENCN-2-POE [v1.3544.00006, #8AB25AA3] |
83 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
84 +| EthernetLANAdapter | CEN-GWEXER-9E6ADA | 10.44.5.120 | 00 | CEN-GWEXER [v1.4230.00015, #848210AD] |
85 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
86 +
87 +MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
88 +Claimed ethernet device: CEN-GWEXER-9E6ADA
89 +MC4>Update request from IP-ID-30 in Program 01
90 +MC4>sr discover zum false
91 +Starting Zum Discovery without gateway claiming
92 +MC4>Performing Discovery on 1 Gateways.
77 77  Evaluating 3 Devices on Gateway 30
78 78  Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
79 79  Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
... ... @@ -84,6 +84,7 @@
84 84  Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
85 85  Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
86 86  Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
103 +Querying cresnet
87 87  Discovering Zum Loads on 1 Gateways.
88 88  Discovering Zum Loads on 3 Devices.
89 89  NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
... ... @@ -152,31 +152,17 @@
152 152  New Loads: 6
153 153  Modified Loads: 0
154 154  Removed Loads: 0
155 -Zum Discovery Finished
156 -}}}
172 +Zum Discovery Finished}}}
157 157  
158 -=== Example for Option 2: ===
174 +=== Claim All Example ===
159 159  
160 -{{{MC4>sr devmgr ethernet query
161 -Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
162 -MC4>sr devmgr ethernet show devices
163 -
164 -+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
165 -| Adapter | Hostname | IP Address | IP-ID | ID |
166 -+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
167 -| EthernetLANAdapter | CI-SJC-CEN-CI3-1-COM3 | 10.44.5.20 | 00 | CEN-CI3-1-C3COM-3 [v1.1620.00000, #008436E2] type:1 |
168 -+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
169 -| EthernetLANAdapter | SB-DIN-CENCN-2 | 10.44.5.81 | 00 | DIN-CENCN-2-POE [v1.3544.00006, #8AB25AA3] |
170 -+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
171 -| EthernetLANAdapter | CEN-GWEXER-9E6ADA | 10.44.5.120 | 00 | CEN-GWEXER [v1.4230.00015, #848210AD] |
172 -+--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
173 -
174 -MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
175 -Claimed ethernet device: CEN-GWEXER-9E6ADA
176 -MC4>Update request from IP-ID-30 in Program 01
177 -MC4>sr discover zum false
178 -Starting Zum Discovery without gateway claiming
179 -MC4>Performing Discovery on 1 Gateways.
176 +{{{MC4>sr discover zum true
177 +Starting Zum Discovery with gateway claiming
178 +MC4>Found 1 Gateways to check.
179 +Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
180 +Update request from IP-ID-30 in Program 01
181 +Claimed 1 Gateways. Waiting for queries to finish.
182 +Performing Discovery on 1 Gateways.
180 180  Evaluating 3 Devices on Gateway 30
181 181  Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
182 182  Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
... ... @@ -187,7 +187,6 @@
187 187  Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
188 188  Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
189 189  Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
190 -Querying cresnet
191 191  Discovering Zum Loads on 1 Gateways.
192 192  Discovering Zum Loads on 3 Devices.
193 193  NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
... ... @@ -257,5 +257,5 @@
257 257  Modified Loads: 0
258 258  Removed Loads: 0
259 259  Zum Discovery Finished
260 - }}}
262 +}}}
261 261  )))