Skip to Content

Changes for page Zūm Discovery

Last modified by Alexander Mott on 2025/04/03 17:35
From version 11.1
edited by Alexander Mott
on 2022/10/05 16:19
Change comment: There is no comment for this version
To version 8.1
edited by Alexander Mott
on 2022/09/23 00:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,6 +8,8 @@
8 8  {{toc/}}
9 9  {{/box}}
10 10  
11 +(% class="row" %)
12 +(((
11 11  If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a SHOWRUNNER™ configuration file using the Zūm Discovery feature that is built into SHOWRUNNER™.
12 12  
13 13  There are certain pre-requisites and limitations when building a SHOWRUNNER™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
... ... @@ -16,14 +16,11 @@
16 16  
17 17  == Notes and Limitations ==
18 18  
19 -(% class="box errormessage" %)
20 -(((
21 21  * SHOWRUNNER™ version 3.014 or newer required
22 22  * Zūm Wired firmware version 1.02.10 or greater required
23 23  * Disconnect from any ZUMNET devices you may be connected to in Toolbox prior to running the discovery commands
24 24  * Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
25 25  * One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
26 -)))
27 27  
28 28  == Steps ==
29 29  
... ... @@ -63,10 +63,8 @@
63 63  
64 64  == Notes and Limitations ==
65 65  
66 -(% class="box errormessage" %)
67 -(((
68 68  * Processor with SHOWRUNNER™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
69 -** For SHOWRUNNER™ versions prior to 3.014 and newer, replace **##sr discover zummesh##** commands with **##sr discover zum##**
66 +** For SHOWRUNNER™ versions 3.014 and newer, replace ##sr discover zum## commands with ##sr discover zummesh##
70 70  * ZUM-NETBRIDGES must already be acquired to their respective gateway
71 71  * SHOWRUNNER™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
72 72  * Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
... ... @@ -81,19 +81,21 @@
81 81  1. **Claim All RF Gateways** - SHOWRUNNER™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different SHOWRUNNER™ or other Crestron systems on the same local network.
82 82  )))
83 83  
81 +(% class="row" %)
82 +(((
84 84  == Manual RF Gateway Assignment Instructions ==
85 85  
86 86  Use this method if you have multiple SHOWRUNNER™ instances on the same network or have gateways used by other Crestron systems.
87 87  
88 88  * Connect to the processor's console with Toolbox or your favorite SSH client.
89 -* Type ##sr devmgr ethernet query## and press enter. This queries the local network for RF Gateways.
90 -* Type ##sr devmgr ethernet show devices## and press enter. This displays all found Crestron ethernet devices.
91 -* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type ##sr ethernet device claim CEN-GWEXER-9E6ADA##. SHOWRUNNER™ will auto-assign an IP-ID. After all gateways have been claimed by SHOWRUNNER™, proceed to the next step.
92 -* Type ##sr discover zummesh false## and press enter.
88 +* Type "//sr devmgr ethernet query//" and press enter. This queries the local network for RF Gateways.
89 +* Type "//sr devmgr ethernet show devices//" and press enter. This displays all found Crestron ethernet devices.
90 +* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type "//sr ethernet device claim CEN-GWEXER-9E6ADA//". SHOWRUNNER™ will auto-assign an IP-ID. After all gateways have been claimed by SHOWRUNNER™, proceed to the next step.
91 +* Type "//sr discover zum false//" and press enter.
93 93  * Status messages and the results will be displayed on the console. The process should take about 3 minutes.
94 -* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
95 -* Type ##progreset## and press enter to restart SHOWRUNNER™
96 -* Once SHOWRUNNER™ has finished restarting type ##sr discover zummesh false## and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
93 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
94 +* Type "//progreset//" and press enter to restart SHOWRUNNER™
95 +* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
97 97  * Once completed SHOWRUNNER™ is now ready for full Zūm control
98 98  
99 99  == Claim All RF Gateways Instructions ==
... ... @@ -101,11 +101,11 @@
101 101  Use this method when you have a single SHOWRUNNER™ instance on a local network with all gateways being used for SHOWRUNNER™.
102 102  
103 103  * Connect to the processor's console with Toolbox or your favorite SSH client.
104 -* Type ##sr discover zummesh true## and press enter.
103 +* Type "//sr discover zum true//" and press enter.
105 105  * Status messages and the results will be displayed on the console. The process should take about 3 minutes.
106 -* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
107 -* Type ##progreset## and press enter to restart SHOWRUNNER™
108 -* Once SHOWRUNNER™ has finished restarting type ##sr discover zummesh false## and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
105 +* When the discovery is finished type "//sr save//" and press enter to save the updated config. Due to an unknown quirk that we are looking into, SHOWRUNNER™ must be restarted to complete the acquire process.
106 +* Type "//progreset//" and press enter to restart SHOWRUNNER™
107 +* Once SHOWRUNNER™ has finished restarting type "//sr discover zum false//" and press enter. SHOWRUNNER™ will be able to acquire the loads attached to the Zūm rooms at this point.
109 109  * Once completed SHOWRUNNER™ is now ready for full Zūm control
110 110  
111 111  == Examples ==
... ... @@ -129,7 +129,7 @@
129 129  MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
130 130  Claimed ethernet device: CEN-GWEXER-9E6ADA
131 131  MC4>Update request from IP-ID-30 in Program 01
132 -MC4>sr discover zummesh false
131 +MC4>sr discover zum false
133 133  Starting Zum Discovery without gateway claiming
134 134  MC4>Performing Discovery on 1 Gateways.
135 135  Evaluating 3 Devices on Gateway 30
... ... @@ -162,7 +162,7 @@
162 162  MC4>progreset
163 163  ...
164 164  CI ShowRunner startup completed successfully in 8072ms
165 -MC4>sr discover zummesh false
164 +MC4>sr discover zum false
166 166  Starting Zum Discovery without gateway claiming
167 167  MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
168 168  Performing Discovery on 1 Gateways.
... ... @@ -215,7 +215,7 @@
215 215  
216 216  === Claim All Example ===
217 217  
218 -{{{MC4>sr discover zummesh true
217 +{{{MC4>sr discover zum true
219 219  Starting Zum Discovery with gateway claiming
220 220  MC4>Found 1 Gateways to check.
221 221  Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
... ... @@ -251,7 +251,7 @@
251 251  MC4>progreset
252 252  ...
253 253  CI ShowRunner startup completed successfully in 8072ms
254 -MC4>sr discover zummesh false
253 +MC4>sr discover zum false
255 255  Starting Zum Discovery without gateway claiming
256 256  MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
257 257  Performing Discovery on 1 Gateways.
... ... @@ -302,3 +302,4 @@
302 302  Removed Loads: 0
303 303  Zum Discovery Finished
304 304  }}}
304 +)))