Skip to Content

Changes for page Zūm Discovery

Last modified by Austin Weygandt on 2025/05/02 20:21
From version 1.1
edited by Alexander Mott
on 2022/09/22 21:31
Change comment: There is no comment for this version
To version 33.1
edited by Mark Kohlmann
on 2024/10/14 21:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Zūm Autodiscovery
1 +Zūm Discovery
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.WebHome
1 +SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Program Configuration.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,6 +1,14 @@
1 +(% class="box errormessage" %)
2 +(((
3 +**IMPORTANT:** When using ShowRunnerCLC™ with a ZUM-HUB4, **do not** discover Zūm Rooms using the Crestron HUB4 Web UI. During discovery, the HUB4 will claim ZUMNET-JBOXs and prevent ShowRunnerCLC™ from auto-discovering or registering the Zūm hardware for itself.
4 +
5 +**WARNING:** Cresnet Discovery is non-functional for ZUMNET-JBOXs with certain versions of Crestron Device Database.
6 +ShowRunnerCLC™ versions v3.019 through v3.041 must be either downgraded to v3.018 or upgraded to v3.042 or newer in order to perform auto-discover functions.
7 +)))
8 +
1 1  (% class="box warningmessage" %)
2 2  (((
3 -This article is about automatically building a SHOWRUNNER™ configuration using the Zūm Autodiscovery feature of SHOWRUNNER™. For instructions on configuring Zūm Wired rooms using the Crestron Zūm App, see [[this page>>SHOWRUNNER™ Setup Guide.Wiring Guide.Zūm Wired System Overview.Crestron Zūm App Overview.WebHome]].
11 +This article is about automatically building a ShowRunnerCLC™ configuration using the Zūm Discovery feature of ShowRunnerCLC™. For instructions on configuring Zūm Wired rooms using the Crestron Zūm App, see [[this page>>SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Preparation.Zūm App Overview.WebHome]].
4 4  For instructions on configuring Zūm Net devices using Crestron Toolbox, see [[this page>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUMNET-JBOX Setup.WebHome]].
5 5  )))
6 6  
... ... @@ -8,31 +8,333 @@
8 8  {{toc/}}
9 9  {{/box}}
10 10  
11 -(% class="row" %)
12 -(((
13 -Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
19 +If Zūm Wired or Wireless devices have been configured using Crestron's Zūm App, then it is possible to automatically build a ShowRunnerCLC™ configuration file using the Zūm Discovery feature that is built into ShowRunnerCLC™.
14 14  
15 -= Para 1 =
21 +There are certain pre-requisites and limitations when building a ShowRunnerCLC™ configuration this way, and it may sometimes be necessary make some adjustments to the final configuration, such as changing keypad types and moving loads between areas.
16 16  
17 -Lorem
23 += Discovery Filter =
18 18  
19 -== Sub 1 ==
25 +Discovered ethernet devices may be filtered using either a hostname or IP Address filter.  The filter is configured from the command line interface.
20 20  
21 -Lorem
27 +##+~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-+~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-+
28 +~| Command | Help |
29 +~|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-|
30 +~| SR discover clear filter | Remove Discovery Filter |
31 +~| SR discover filter | Show Discovery Filter |
32 +~| SR discover filter (X:S) | Set Discovery Filter |
33 +~| - | (X):S:Filter String |
34 +~|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-|~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-|##
22 22  
23 -== Sub 2 ==
36 +=== Hostname Filter ===
24 24  
25 -Lorem
38 +Hostname filter uses a regular expression to filter discovered ZUMNET GATEWAYs or JBOXs.  Multiple expressions can be applied by using a comma to separate the expressions.
26 26  
27 -= Para 2 =
40 +Command Syntax: ##"Type='Hostname' Settings='Expr1[,Expr2]'"##
28 28  
29 -Lorem
42 +Examples:
30 30  
31 -== Sub 1 ==
44 +1. Only include hostnames that start with ZUMNET-06:
45 +(% style="font-family: Menlo, Monaco, Consolas, Courier New, monospace; white-space: pre" %)sr discover filter "Type='Hostname' Settings='^ZUMNET-06'"
46 +1. Include hostnames that start with ZUMNET-FL01 or contain FL03:
47 +(% style="font-family: Menlo, Monaco, Consolas, Courier New, monospace; white-space: pre" %)sr discover filter "Type='Hostname' Settings='^ZUMNET-FL01,FL03'"
32 32  
33 -Lorem
49 += Zūm Wired Discovery =
34 34  
35 -== Sub 2 ==
51 +== Notes and Limitations ==
36 36  
37 -Lorem
53 +(% class="box warningmessage" %)
54 +(((
55 +* ShowRunnerCLC™ version 3.014 or newer required
56 +* Zūm Wired firmware .puf version 1.02.10 or greater required (ZUMNET-JBOX installed minimum version 1.001.00081)
57 +* Disconnect from any ZUMNET devices you may be connected to in Toolbox and confirm all hardware (NETs and LINKs) are online prior to running the discovery commands
58 +* Cresnet devices landed on Zūm Link will not be discovered (Crestron bug expected to be corrected in a future firmware release)
59 +* ZUMLINK-IOs will not be discovered (Expected to be discoverable in future ShowRunnerCLC™ release)
60 +* ZUMLINK-KPs will not be discovered on older versions of ShowRunnerCLC™ (v3.058 or newer will discover keypads and set as remote type)
61 +* One area will be created per ZUMNET-JBOX; if there are more areas than ZUMNET-JBOXs, additional areas must be created manually
38 38  )))
63 +
64 +== Steps ==
65 +
66 +1. [[Install ShowRunner™>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.WebHome]] on the processor and configure the processor as necessary
67 +1*. Note that while Zūm Wired discovery will build a configuration, if a configuration file was provided then it should still be loaded as it may contain location data or non-Zūm devices.
68 +1. If the ZUMNET-JBOX firmware is too out-of-date to connect using the Crestron Zūm App, then there are some additional steps required: 
69 +1*. Connect to the first ZUMNET-JBOX in Toolbox
70 +1*. Configure a static IP address for the ZUMNET-JBOX if there is no DHCP server on the network 
71 +1**. Note: The ShowRunnerCLC™ built-in DHCP server is not meant to be used in production
72 +1**. If the ShowRunnerCLC™ built-in DHCP server was used to assign IP addresses to devices, it is still necessary to give those devices static IP addresses
73 +1*. Set unique Connection IDs for each device hosted on the ZUMNET-JBOX so that their firmware can be updated
74 +1*. Load the Zūm Wired firmware to the ZUMNET-JBOX
75 +1*. Repeat the above steps for all ZUMNET-JBOXs
76 +1*. Once all the ZUMNET-JBOXs have pushed the new firmware to their hosted devices, disconnect from them in Toolbox and proceed to the next step
77 +1. Connect to each ZUMNET-JBOX in the Crestron Zūm App
78 +1*. Commission room through the app
79 +1**. configure keypad logic
80 +1**. configure occupancy sensor settings
81 +1**. calibrate photocell(s)
82 +1*. Set hostnames for the ZUMNETs.
83 +1**. Zūm discovery will bring in hostnames.
84 +1. Unique Connection IDs should be automatically assigned to any Zūm Link and Cresnet devices on the ZUMNET-JBOX
85 +1*. If firmware was out-of-date, then this step should have already been completed
86 +1*. If unique CIDs are not automatically assigned, connect to the JBOX in Toolbox and give the devices unique CIDs
87 +1. Configure a static IP address for the ZUMNET-JBOX if there is no DHCP server on the network 
88 +1*. If firmware was out-of-date, then this step should have already been completed
89 +1*. Note: The ShowRunnerCLC™ built-in DHCP server is not meant to be used in production
90 +1*. If the ShowRunnerCLC™ built-in DHCP server was used to assign IP addresses to devices, it is still necessary to give those devices static IP addresses
91 +1. Optionally, manually configure the ZUMNET-JBOX IP table to point at the processor if you want to keep track of which ZUMNET-JBOX is at each IP-ID
92 +1*. If you do not manually configure the IP table, then SHOWRUNNER™ will automatically configure the IP-ID for each ZUMNET-JBOX during discovery
93 +1. Set the ZUMNET-JBOX into either Zūm ("App") mode or CNET mode as required for the program
94 +1*. Full control from ShowRunnerCLC™ is only possible if all ZUMNET-JBOXs are in CNET mode. Odd behavior may result from conflicts between ShowRunnerCLC™ and internal logic if the ZUMNET-JBOXs are not put into CNET mode
95 +1. Repeat from step 3 until all ZUMNET-JBOXs that are to be controlled by ShowRunnerCLC™ have static IP addresses and unique CIDs for any hosted devices
96 +1. Disconnect from any ZUMNET-JBOXs and then connect to the processor in Toolbox
97 +1. Run the command: ##sr discover zumnet true false##
98 +1*. This command tells ShowRunnerCLC™ to discover all ZUMMNET-JBOXs on the network, configure their IP tables, and then add corresponding IP Devices to the configuration
99 +1. Run the command: ##sr discover zumnet true true##
100 +1*. This command tells ShowRunnerCLC™ to discover all Zūm Link hardware (including the internal ZUMNET-JBOX load controller) on the previously discovered Zūm Net devices and then add corresponding areas, loads, sensors, etc. to the configuration
101 +1**. One area will be created per ZUMNET-JBOX, and all hardware attached to that ZUMNET-JBOX will be assigned to that area
102 +1*. This command **does not** bring in Cresnet devices: those must be added to the configuration manually until this issue is fixed in the Zūm Wired firmware
103 +1. If all steps have been performed successfully, then you should be able to use the ##sr show area##, ##sr show load##, ##sr show keypad##, and ##sr show occ## commands to see that the ZUMNET and ZUMLINK hardware has been discovered correctly.
104 +
105 += Zūm Wireless Discovery =
106 +
107 +== Notes and Limitations ==
108 +
109 +(% class="box warningmessage" %)
110 +(((
111 +* Processor with ShowRunnerCLC™ version 2.190 or newer must be running on the same network as the gateway(s) to be acquired
112 +** For ShowRunnerCLC™ versions prior to 3.014 and newer, replace **##sr discover zummesh##** commands with **##sr discover zum##**
113 +* ZUM-NETBRIDGES must already be acquired to their respective gateway
114 +* ShowRunnerCLC™ will automatically address any ZUM-NETBRIDGES that do not need have addresses assigned, but will still honor any already addressed devices
115 +* Disconnect from any RF gateways you may be connected to in Toolbox prior to running the discovery command
116 +* Plug loads will not appear in the ShowRunnerCLC™ UI
117 +* Newer GWEXER firmware enables SSL by default. Follow the instructions at [[SSL User Configuration>>doc:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Appendix.SSL User Configuration.WebHome]] and manually add the IP Table entries on the GWEXER
118 +)))
119 +
120 +(% class="box infomessage" id="HCaution:" %)
121 +(((
122 +**Note:** ShowRunnerCLC™ has two different approaches for Zūm Wireless Discovery
123 +
124 +1. **Manual RF Gateway Assignment** - ShowRunnerCLC™ can be told which gateways it should scan. Use this approach if you have gateways that are used by multiple systems on the same local network.
125 +1. **Claim All RF Gateways** - ShowRunnerCLC™ will find all CEN-GWEXERs [ZUMNET-GATEWAY] on the network and will claim them as its own. **DO NOT** use this method if there are gateways used by different ShowRunnerCLC™ or other Crestron systems on the same local network.
126 +)))
127 +
128 +== Manual RF Gateway Assignment Instructions ==
129 +
130 +Use this method if you have multiple ShowRunnerCLC™ instances on the same network or have gateways used by other Crestron systems.
131 +
132 +* Connect to the processor's console with Toolbox or your favorite SSH client.
133 +* Type ##sr devmgr ethernet query## and press enter. This queries the local network for RF Gateways.
134 +* Type ##sr devmgr ethernet show devices## and press enter. This displays all found Crestron ethernet devices.
135 +* For each gateway that you'd like this instance of SHOWRUNNER™ to use, use the hostname from the table of found ethernet devices. For example if the gateway Hostname is CEN-GWEXER-9E6ADA type ##sr ethernet device claim CEN-GWEXER-9E6ADA##. ShowRunnerCLC™ will auto-assign an IP-ID. After all gateways have been claimed by ShowRunnerCLC™, proceed to the next step.
136 +* Type ##sr discover zummesh false## and press enter.
137 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
138 +* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunnerCLC™ must be restarted to complete the acquire process.
139 +* Type ##progreset## and press enter to restart ShowRunnerCLC™
140 +* Once SHOWRUNNER™ has finished restarting type ##sr discover zummesh false## and press enter. ShowRunnerCLC™ will be able to acquire the loads attached to the Zūm rooms at this point.
141 +* Once completed SHOWRUNNER™ is now ready for full Zūm control
142 +
143 +== Claim All RF Gateways Instructions ==
144 +
145 +Use this method when you have a single ShowRunnerCLC™ instance on a local network with all gateways being used for ShowRunnerCLC™.
146 +
147 +* Connect to the processor's console with Toolbox or your favorite SSH client.
148 +* Type ##sr discover zummesh true## and press enter.
149 +* Status messages and the results will be displayed on the console. The process should take about 3 minutes.
150 +* When the discovery is finished type ##sr save## and press enter to save the updated config. Due to an unknown quirk that we are looking into, ShowRunnerCLC™ must be restarted to complete the acquire process.
151 +* Type ##progreset## and press enter to restart ShowRunnerCLC™
152 +* Once ShowRunnerCLC™ has finished restarting type ##sr discover zummesh false## and press enter. ShowRunnerCLC™ will be able to acquire the loads attached to the Zūm rooms at this point.
153 +* Once completed ShowRunnerCLC™ is now ready for full Zūm control
154 +
155 +== Examples ==
156 +
157 +=== Manual Example ===
158 +
159 +{{{MC4>sr devmgr ethernet query
160 +Ethrenet AutoDiscovery Result: AutoDiscoveryOperationSuccess
161 +MC4>sr devmgr ethernet show devices
162 +
163 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
164 +| Adapter | Hostname | IP Address | IP-ID | ID |
165 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
166 +| EthernetLANAdapter | CI-SJC-CEN-CI3-1-COM3 | 10.44.5.20 | 00 | CEN-CI3-1-C3COM-3 [v1.1620.00000, #008436E2] type:1 |
167 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
168 +| EthernetLANAdapter | SB-DIN-CENCN-2 | 10.44.5.81 | 00 | DIN-CENCN-2-POE [v1.3544.00006, #8AB25AA3] |
169 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
170 +| EthernetLANAdapter | CEN-GWEXER-9E6ADA | 10.44.5.120 | 00 | CEN-GWEXER [v1.4230.00015, #848210AD] |
171 ++--------------------+-------------------------------+-------------+-------+----------------------------------------------------------------------------------+
172 +
173 +MC4>sr ethernet device claim CEN-GWEXER-9E6ADA
174 +Claimed ethernet device: CEN-GWEXER-9E6ADA
175 +MC4>Update request from IP-ID-30 in Program 01
176 +MC4>sr discover zummesh false
177 +Starting Zum Discovery without gateway claiming
178 +MC4>Performing Discovery on 1 Gateways.
179 +Evaluating 3 Devices on Gateway 30
180 +Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
181 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
182 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
183 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
184 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
185 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
186 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
187 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
188 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
189 +Querying cresnet
190 +Discovering Zum Loads on 1 Gateways.
191 +Discovering Zum Loads on 3 Devices.
192 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
193 +Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
194 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
195 +Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
196 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
197 +Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
198 +RF Gateways: 0
199 +RF Devices: 3
200 +New Loads: 0
201 +Modified Loads: 0
202 +Removed Loads: 0
203 +Zum Discovery Finished
204 +MC4>sr save
205 +Saved config
206 +MC4>progreset
207 +...
208 +CI ShowRunner startup completed successfully in 8072ms
209 +MC4>sr discover zummesh false
210 +Starting Zum Discovery without gateway claiming
211 +MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
212 +Performing Discovery on 1 Gateways.
213 +Evaluating 3 Devices on Gateway 30
214 +Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
215 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
216 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
217 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
218 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
219 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
220 +Discovering Zum Loads on 1 Gateways.
221 +Discovering Zum Loads on 3 Devices.
222 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
223 +Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
224 +Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
225 +Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
226 +Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
227 +Load: Load37615 Added
228 +NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
229 +Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
230 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
231 +Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
232 +Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
233 +Load: Load1154 Added
234 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
235 +Load: Load0 Added
236 +Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
237 +Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
238 +Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
239 +Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
240 +Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
241 +NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
242 +Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
243 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
244 +Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
245 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
246 +Load: Load60367 Added
247 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
248 +Load: Load15553 Added
249 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
250 +Load: Load63818 Added
251 +NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
252 +Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
253 +RF Gateways: 0
254 +RF Devices: 3
255 +New Loads: 6
256 +Modified Loads: 0
257 +Removed Loads: 0
258 +Zum Discovery Finished}}}
259 +
260 +=== Claim All Example ===
261 +
262 +{{{MC4>sr discover zummesh true
263 +Starting Zum Discovery with gateway claiming
264 +MC4>Found 1 Gateways to check.
265 +Claimed Gateway SN: 1720JBH04269 at IP-ID: 30
266 +Update request from IP-ID-30 in Program 01
267 +Claimed 1 Gateways. Waiting for queries to finish.
268 +Performing Discovery on 1 Gateways.
269 +Evaluating 3 Devices on Gateway 30
270 +Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
271 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 03
272 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 03
273 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
274 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 04
275 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 04
276 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
277 +Dev: ZUM-NETBRIDGE addrssing to RF ID: 05
278 +Setting up RF Device 'ZUM-NETBRIDGE' on Gateway 30 at RF-ID 05
279 +Discovering Zum Loads on 1 Gateways.
280 +Discovering Zum Loads on 3 Devices.
281 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
282 +Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
283 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
284 +Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
285 +NETBIRDGE: NewLoads: 0 ModifiedLoads: 0 RemovedLoads: 0
286 +Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
287 +RF Gateways: 0
288 +RF Devices: 3
289 +New Loads: 0
290 +Modified Loads: 0
291 +Removed Loads: 0
292 +Zum Discovery Finished
293 +MC4>sr save
294 +Saved config
295 +MC4>progreset
296 +...
297 +CI ShowRunner startup completed successfully in 8072ms
298 +MC4>sr discover zummesh false
299 +Starting Zum Discovery without gateway claiming
300 +MC4>Notice: SimplSharpPro[App01] # 2020-07-21 22:19:46 # Recalling startup scenes (if applicable)
301 +Performing Discovery on 1 Gateways.
302 +Evaluating 3 Devices on Gateway 30
303 +Claiming ZUM-NETBRIDGE SN: 1726NEJ01096 from IP-ID: 30
304 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 03
305 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03096 from IP-ID: 30
306 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 04
307 +Claiming ZUM-NETBRIDGE SN: 1914NEJ03098 from IP-ID: 30
308 +Dev: ZUMMESH-NETBRIDGE already claimed at RF ID: 05
309 +Discovering Zum Loads on 1 Gateways.
310 +Discovering Zum Loads on 3 Devices.
311 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
312 +Evaluating Device: ZUM-JBOX-20A-PLUG ShortAddress: 0000 Type: PlugLoad
313 +Evaluating Device: ZUM-KP10C-BATT ShortAddress: 52E5 Type: Keypad
314 +Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: DAF1 Type: OccupancySensor
315 +Evaluating Device: ZUM-JBOX-5A-LV ShortAddress: 92EF Type: DimmableLoad
316 +Load: Load37615 Added
317 +NETBIRDGE: NewLoads: 1 ModifiedLoads: 0 RemovedLoads: 0
318 +Device: ZUM Netbridge 30:03 at 30:03 discovery result: .
319 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
320 +Evaluating Device: ZUM-DALI ShortAddress: 740D Type: Unknown
321 +Evaluating Device: ZUM-5A-LV ShortAddress: 0482 Type: DimmableLoad
322 +Load: Load1154 Added
323 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 0000 Type: DimmableLoad
324 +Load: Load0 Added
325 +Evaluating Device: ZUM-KP10C-BATT ShortAddress: D766 Type: Keypad
326 +Evaluating Device: ZUM-OL-PHO-BATT ShortAddress: 95ED Type: Photocell
327 +Evaluating Device: ZUM-PIR-OCC-BATT ShortAddress: 44C2 Type: OccupancySensor
328 +Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
329 +Evaluating Device: ZUM-DALI-GROUP ShortAddress: 740D Type: Unknown
330 +NETBIRDGE: NewLoads: 2 ModifiedLoads: 0 RemovedLoads: 0
331 +Device: ZUM Netbridge 30:04 at 30:04 discovery result: .
332 +Evaluating Device: ZUM-BLE ShortAddress: FFFA Type: BLERadio
333 +Evaluating Device: ZUM-SIM ShortAddress: 0000 Type: OccupancySensor, PartitionSensor
334 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: EBCF Type: DimmableLoad
335 +Load: Load60367 Added
336 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: 3CC1 Type: DimmableLoad
337 +Load: Load15553 Added
338 +Evaluating Device: ZUM-JBOX-16A-LV ShortAddress: F94A Type: DimmableLoad
339 +Load: Load63818 Added
340 +NETBIRDGE: NewLoads: 3 ModifiedLoads: 0 RemovedLoads: 0
341 +Device: ZUM Netbridge 30:05 at 30:05 discovery result: .
342 +RF Gateways: 0
343 +RF Devices: 3
344 +New Loads: 6
345 +Modified Loads: 0
346 +Removed Loads: 0
347 +Zum Discovery Finished
348 +}}}