Wiki source code of Touchpanel Node Restrictions
Version 9.1 by Mark Kohlmann on 2023/06/24 00:07
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | ShowRunnerCLC 3.34 and newer all a touchpanel to have its area list filtered based on a Node. At the moment part of this configuration must be done manually. Below are the steps necessary to perform this configuration. Any areas defined to the node assigned to the touchpanel and defined within any child node will be accessible to the touchpanel. | ||
| 2 | |||
| 3 | In this example we are going to setup a touchpanel to allow access to only "Workrooms". | ||
| 4 | |||
| 5 | Steps: | ||
| 6 | |||
| 7 | 1. Login into the showrunner HUB interface with a web browser | ||
| 8 | 1. Create a Node and organize your areas | ||
| 9 | [[image:1687564779903-321.png||height="770" width="217"]] | ||
| 10 | 1. Retrieve the config from Setup->File Management->Download | ||
| 11 | [[image:1687564875527-314.png||height="325" width="700"]] | ||
| 12 | 1. Open the config in a text editor. VS Code or Notepad++ are recommended | ||
| 13 | 1. Find the Nodes section and look for Workrooms |