Skip to Content

Changes for page Keypad Configuration

Last modified by Alexander Mott on 2024/05/31 19:33
From version 40.6
edited by Alexander Mott
on 2023/02/08 20:19
Change comment: (Autosaved)
To version 40.7
edited by Alexander Mott
on 2023/02/08 20:24
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -31,27 +31,27 @@
31 31  
32 32  == showrunnerHUB™ ==
33 33  
34 -The showrunnerHUB™ Web Interface can be used to configure both To configure keypads using the showrunnerHUB™ UI:
34 +The showrunnerHUB™ Web Interface can be used to configure both standard keypads as well as custom X-Type keypads. Note that if an X-Type keypad was configured manually by editing the configuration file, then it might be missing some information that is required for the showrunnerHUB™ UI to be able to view and edit the keypad correctly. In these cases it is recommended to either continue editing the keypad manually using the configuration, or re-do the keypad customization with the showrunnerHUB™ UI in order to ensure that all the required information is generated.
35 35  
36 +To configure keypads using the showrunnerHUB™ UI:
37 +
36 36  * Log in to the web interface
37 37  * Click the "Setup" gear icon from the top right of the screen to navigate to the setup menu
38 38  * Click "Keypad Configuration" from the list on the left to bring up a list of keypads defined in the configuration
39 39  * Select the desired keypad from the list of keypads
40 -* Edit the keypad name, contractor label, area assignment, and type as desired.
42 +* Edit the keypad name, contractor label, area assignment, and type as desired
41 41  ** Detailed instructions on using the keypad configuration menu in the showrunnerHUB™ UI are available [[here>>attach:SHOWRUNNER™ Setup Guide.showrunnerHUB™.Keypad Configuration.WebHome@CI Keypad Editor UI Guide.pdf]]
42 42  
43 -Custom keypads can be configured from the showrunnerHUB™ Web Interface, or they can be manually added to the config and enabled using the XPanel Touchscreen interface.
45 +The next section contains more detailed information regarding custom keypad functions.
44 44  
45 -The next section contains a comprehensive list of actions which can be used to manually configure X-Type keypads from the SrConfig.json file. The table was generated using showrunner™ v3.019, but can be viewed for any version of showrunner™ by connecting to a processor running the desired version of showrunner™ and running the command: ##sr sh ac##
46 -
47 -Note that actions with "None" listed under "Triggers" are read-only and are only able to be used for keypad or keyswitch feedback.
48 -
49 49  = Custom (X-Type) Keypad Configuration =
50 50  
51 51  The showrunner™ X-Type keypad is a customizable keypad type available for Cameo, Horizon, GLPPA-KP, and Zūm Wired keypads. See[[ this document>>attach:SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Keypad Types.WebHome@showrunnerKeypadStyles.pdf]] for a list of possible keypad layouts for all keypad types. It is recommended to customize keypads using the showrunnerHUB™ UI whenever possible, as keypads which have been manually customized in the configuration will be missing certain attributes that are required to allow them to be subsequently editable from the showrunnerHUB™ UI.
52 52  
53 -== ==
51 +The table below contains comprehensive list of actions which can be used to manually configure X-Type keypads from the SrConfig.json file. The table was generated using showrunner™ v3.019, but can be viewed for any version of showrunner™ by connecting to a processor running the desired version of showrunner™ and running the command: ##sr sh ac##
54 54  
53 +Note that actions with "None" listed under "Triggers" are read-only and are only able to be used for keypad or keyswitch feedback.
54 +
55 55  == X-Type Templates ==
56 56  
57 57  Below is a table of possible actions for X-Type keypads (taken from the [[SHOWRUNNER™ Keypad Types page>>SHOWRUNNER™ User Guide & Wiki.SHOWRUNNER™ Keypad Types.WebHome]].