Skip to Content

Changes for page Keypad Configuration

Last modified by Alexander Mott on 2024/05/31 19:33
From version 40.3
edited by Alexander Mott
on 2023/02/08 20:04
Change comment: (Autosaved)
To version 40.4
edited by Alexander Mott
on 2023/02/08 20:09
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -21,7 +21,7 @@
21 21  
22 22  Keypads in showrunner™ can be configured using either the XPanel UI or the showrunnerHUB™ UI. Both user interfaces allow for enabling/disabling keypads, changing the keypad area assignment, and modifying the keypad type.
23 23  
24 -Using the kypad configuration menu to enable or disable keypads is only recommended for commissioning/testing purposes. Changes to a keypad's enabled/disabled status made through the K During normal operation, keypads should be enabled and disabled using Scheduled Events. Changes to a keypad's enabled or disabled status made through the UI will st
24 +If a keypad is manually enabled or disabled through the Keypad Configuration menu, it will stay in that enabled or disabled state until something else (e.g. a scheduled event or a global action) occurs that changes its status. For this reason, it is only recommended to enable or disable keypads through the Keypad Configuration menu for testing purposes. During normal operation, keypads should be enabled and disabled using Scheduled Events unless t
25 25  
26 26  Note that while it is possible to use the XPanel UI to change a keypad from a standard keypad type to a custom X-Type keypad, defining custom functions is only possible through the showrunnerHUB™ UI or by editing the configuration manually. When a keypad is changed into an X-Type keypad using the XPanel UI, the keypad will perform any actions that are defined in the configuration. If no actions are defined, then it will not perform any functions.
27 27