Casambi (Lithernet) Configuration

ShowRunnerCLC™ can integrate with Casambi via the Lithernet Gateway using the Casambi TCP profile.

Features:

• Recall a Casambi scene (1-255) when recalling a ShowRunnerCLC™ area scene
• Pending Features:
  • Control intensity of Groups
  • Control Color of Groups
  • Control Color Temperature of Groups
  • Presence sensor status
  • more

How to Integrate:

1. Download SRExt_LithernetGateway.dll from the ShowRunner Releases / Extensions / Lithernet folder on the ShowRunner software release site
2. Place the SRExt_LithernetGateway.dll in the /nvram/sr/default/extensions folder on your processor
3. Add a LithernetCasambiTcp load controller to your ShowRunnerCLC™ configuration.  Specify the Port to use, default is 50000.  Contact Chief Integrations for more info.
4. From the General Settings / System tab of the Lithernet Gateway, under Control System, select Wizard
   
5. Select Type: TCP Casambi Command
   
6. Enter the following settings:
   1. TCP-Port: 50000 or the Port specified in the ShowRunnerCLC™ configuration for the "Port" property
   2. Net ID: Set to 0 unless there is a reason otherwise specified
   3. DEC or HEX: Hex with dot
   4. System IP: IP Address of the Crestron processor
      
7. ShowRunnerCLC™ will log an entry whenever a Lithernet connects to the processor:
   Notice: SimplSharpPro[App01] # 2024-12-12 12:40:33 # Lithernet Casambi TCP accepted connection from 10.44.5.250:64274
8. Configure Scene Tracking in ShowRunnerCLC™ to map area scenes to Casambi scenes
   

   Specify the scene maps per area.  The ID specified is the ID of the scene in the Casambi system.
   

9. Trigger the scene in ShowRunnerCLC™ and verify the Casambi system responds accordingly.