Skip to Content
Last modified by Alexander Mott on 2024/01/05 19:12
From version 1.1
edited by Alexander Mott
on 2022/06/22 18:24
Change comment: There is no comment for this version
To version 3.1
edited by Alexander Mott
on 2022/06/22 20:00
Change comment: Renamed back-links.

Summary

Details

Page properties
Content
... ... @@ -22,9 +22,10 @@
22 22  ** Follow the load schedule
23 23  * Serial number collection
24 24  ** SNs should be collected for all networked devices (all Cresnet devices and Zūm Wired devices)
25 +*** If possible, SNs should be provided prior to startup. This way they can be put into the configuration prior to arriving on-site
25 25  ** The EC does not need to collect SNs for non-system devices (e.g. Crestron NS occupancy sensors, Steinel occupancy sensors, LDL photocells, and GLPPA-KP keypads
26 26  ** It is important to not just have a list of SNs on-site, but to be able to associate individual SNs with specific installed devices
27 27  ** The easiest way to do this is to write the SNs of installed devices on the floor plans or riser diagram as they are installed
28 28  * MAC address collection (optional)
29 29  ** Collecting MAC addresses is redundant if serial numbers are provided
30 -* Establish expectations for what "ready to commission" means by sharing the [[site readiness checklist>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Site Readiness Checklist.WebHome]]
31 +* Establish expectations for what "ready to commission" means by sharing the [[site readiness checklist>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Preparation.Site Readiness Checklist.WebHome]]