Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 9.1
edited by Mark Kohlmann
on 2022/04/15 15:18
Change comment: There is no comment for this version
To version 7.1
edited by Alexander Mott
on 2022/03/14 21:35
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.mark\.kohlmann@chiefintegrations\.com
1 +XWiki.alexander\.mott@chiefintegrations\.com
Content
... ... @@ -1,11 +9,3 @@
1 -(% class="box warningmessage" %)
2 -(((
3 -showrunner is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
4 -3-Series: PUF 1.8001.0146
5 -4-Series: 2.7000.00052.01
6 -VC-4: 2.7000.00047
7 -)))
8 -
9 9  === Notes ===
10 10  
11 11  Static IP or properly setup DHCP/DNS implementation required.
... ... @@ -61,18 +61,11 @@
61 61  *** Leave restart unchecked after transfer
62 62  *** Select “Choose File” find the license file you downloaded from the portal
63 63  *** Select “Upload”
64 -** Loading Configuration
65 -*** From Configuration File
66 -**** Under “Upload New Config File”
67 -***** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.
68 -***** Select “Upload”
69 -***** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console
70 -***** The program will restart
71 -*** From Backup
72 -**** Select "Restore"
73 -**** Select "Choose Backup" and find the "SRBackup.zip" of the backup you wish to restore
74 -**** Enter the secret used to create the backup.  Showrunner will upload the file and verify the secret.
75 -**** Select "Restart" to load the new configuration
56 +** Under “Upload New Config File”
57 +*** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.
58 +*** Select “Upload”
59 +*** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console
60 +*** The program will restart
76 76  * Wait about 45 seconds after loading the configuration for the program to restart completely
77 77  
78 78  === TSW Setup (Per Panel) ===