Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 7.1
edited by Alexander Mott
on 2022/03/14 21:35
Change comment: There is no comment for this version
To version 10.1
edited by Mark Kohlmann
on 2022/04/15 15:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,3 +1,11 @@
1 +(% class="box warningmessage" %)
2 +(((
3 +showrunner is tested against current Crestron firmware releases.  Please use at least the recommended firmware builds.
4 +3-Series: PUF 1.8001.0146
5 +4-Series: 2.7000.00052.01
6 +VC-4: 2.7000.00047
7 +)))
8 +
1 1  === Notes ===
2 2  
3 3  Static IP or properly setup DHCP/DNS implementation required.
... ... @@ -53,11 +53,18 @@
53 53  *** Leave restart unchecked after transfer
54 54  *** Select “Choose File” find the license file you downloaded from the portal
55 55  *** Select “Upload”
56 -** Under “Upload New Config File”
57 -*** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.
58 -*** Select “Upload”
59 -*** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console
60 -*** The program will restart
64 +** Loading Configuration
65 +*** From Configuration File
66 +**** Under “Upload New Config File”
67 +***** Select “Choose File” and find the provided SrConfig.json for this processor from the project link that was sent at project delivery.
68 +***** Select “Upload”
69 +***** Alternatively, you can drop the License.lic using Toolbox’s File Manager or your SFTP client into the NVRAM/sr folder of the processor, the SrConfig.json into NVRAM/sr/default and perform “progreset” from the processor’s console
70 +***** The program will restart
71 +*** From Backup
72 +**** Select "Restore"
73 +**** Select "Choose Backup" and find the "SRBackup.zip" of the backup you wish to restore
74 +**** Enter the secret used to create the backup.  Showrunner will upload the file and verify the secret.
75 +**** Select "Restart" to load the new configuration
61 61  * Wait about 45 seconds after loading the configuration for the program to restart completely
62 62  
63 63  === TSW Setup (Per Panel) ===