Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 22.1
edited by Alexander Mott
on 2022/06/09 17:20
Change comment: There is no comment for this version
To version 4.1
edited by Scott Kohlmann
on 2021/12/14 22:20
Change comment: Uploaded new attachment "MicrosoftTeams-image7c355557d0a3ae410e72498ee667de2df50226f3e3940c2df4b51bb7137e176b.png", version {1}

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -SHOWRUNNER™ Setup Guide.WebHome
1 +SHOWRUNNER™ User Guide & Wiki.WebHome
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.alexander\.mott@chiefintegrations\.com
1 +XWiki.scott\.kohlmann@chiefintegrations\.com
Content
... ... @@ -1,9 +1,63 @@
1 -=== Installation Guide ===
1 +=== Notes ===
2 2  
3 -* [[Processor Setup>>doc:.Processor Setup.WebHome]]
4 -** [[IP Configuration and Program Load>>SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Processor Setup.WebHome||anchor="HIPConfigurationandProgramLoad28PerProcessor29"]]
5 -** [[License and Configuration Deployment>>SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Processor Setup.WebHome||anchor="HLicenseandConfigurationDeployment"]]
6 -* DIN-CENCN-2 Setup
7 -* GLPAC Expansion Setup
8 -* TSW Touchpanel Setup
9 -* ZUMNET-JBOX Setup
3 +Static IP or properly setup DHCP/DNS implementation required.
4 +
5 +Auto-Assigned/Link-Local IP address range of 169.254.x.x not supported (Crestron xPanel issue)
6 +
7 +ShowRunner is a continuously evolving product, please update to the latest firmware
8 +
9 +
10 +**ShowRunner Installation Tutorial:**
11 +
12 +[[https:~~/~~/www.youtube.com/watch?v=xuJ94cMCCa8>>url:https://www.youtube.com/watch?v=xuJ94cMCCa8]]
13 +
14 +**Licensing tutorial:**
15 +
16 +//Note: Please use Chrome or Firefox to download the License from [[https:~~/~~/portal.chiefintegrations.com>>https://portal.chiefintegrations.com]].  Edge and Internet Explorer do not work properly.//
17 +
18 +[[https:~~/~~/www.youtube.com/watch?v=H8CLZ7bp0eI>>url:https://www.youtube.com/watch?v=H8CLZ7bp0eI]]
19 +
20 +=== Processor Setup and Program Load (Per Processor) ===
21 +
22 +* Obtain the latest build of ShowRunner [[https:~~/~~/files.chiefintegrations.com/s/WHNzXrrZbB5jC3E>>url:https://files.chiefintegrations.com/s/WHNzXrrZbB5jC3E]]
23 +* Set the processor’s IP Address per your network requirements
24 +* Connect your computer to the same network as the processor. Make sure your computer’s IP settings are compatible with the lighting hardware.
25 +* Double click the PUF to install ShowRunner (works best with Toolbox closed)
26 +* Select the PUF file again if needed, connect to the processor using the pencil, and select Recheck (This verifies the need to install the program, the XPanel UI, and the Crestron App UI)
27 +* Click Update when prompted to install ShowRunner
28 +* After loading, you can connect to the UI by navigating to the processor’s IP using any internet browser that supports Adobe Flash (Adobe Flash is required for Crestron’s xPanel)
29 +** If only a white screen is shown, navigate to “http:~/~/(ProcessorIpAddress)/core3xpanel.html” to force the UI path
30 +* ShowRunner will be loaded but a configuration and license are still needed.  Please proceed with the next section.
31 +
32 +=== License and Configuration Deployment ===
33 +
34 +* Download the configuration file from the link provided by Chief Integrations
35 +* Obtain and download the license from [[https:~~/~~/portal.chiefintegrations.com>>url:https://portal.chiefintegrations.com]]
36 +* Navigate to the ShowRunner management page
37 +“http:~/~/(ProcessorIpAddress)/cws/showrunner/main” in your browser
38 +* Click File Management
39 +** Under “Upload New License File”
40 +*** Uncheck restart after transfer
41 +*** Select “Choose File” find the license file you downloaded from the portal
42 +*** Select “Upload”
43 +** Under “Upload New Config File”
44 +*** Select “Choose File” and find the provided CiLightingConfig.json for this processor from the project link that was sent at project delivery.
45 +*** Select “Upload”
46 +*** Alternatively, you can drop the License.lic and CiLightingConfig.json using Toolbox’s File Manager or your SFTP client into the NVRAM folder of the processor and perform “progreset” from the processor’s console
47 +*** The program will restart
48 +* Wait about 45 seconds after loading the configuration for the program to restart completely
49 +
50 +=== TSW Setup (Per Panel) ===
51 +
52 +* Set the TSW’s IP Address per your network requirements
53 +* Connect the PUF to the TSW to load the UI
54 +* When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
55 +** You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.
56 +
57 +=== GLPAC Setup ===
58 +
59 +* When GLPACs are deployed Chief Integrations will provide a load script that loads and configures the GLPAC hardware.  The script includes Chief Integrations chosen IP addresses unless otherwise requested.
60 +* Set the IP addresses on all GLPACs per your network requirements.  The script will need to be updated if IP Addresses are changed from Chief Integrations chosen IP Addresses.
61 +* Using Toolbox -> Script Manager, select the Scripting dropdown or right click and select “Load Script”.  Find the text file provided.
62 +* Provided the given IPs can be seen on the network, double or right clicking an entry will load the program and link the IP table, enabling control through ShowRunner
63 +* Say yes to the dialog warning the hardware does not match (if prompted), and yes to overwrite the IP table (if prompted)