Skip to Content
Last modified by Scott Kohlmann on 2023/04/20 22:37
From version 1.2
edited by Mark Kohlmann
on 2020/04/06 22:16
Change comment: Update document after refactoring.
To version 2.1
edited by Mark Kohlmann
on 2020/04/09 18:36
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.MarkKohlmann
1 +XWiki.mark\.kohlmann@chiefintegrations\.com
Content
... ... @@ -13,6 +13,8 @@
13 13  
14 14  **Licensing tutorial:**
15 15  
16 +//Note: Please use Chrome or Firefox to download the License from [[https:~~/~~/portal.chiefintegrations.com>>https://portal.chiefintegrations.com]].  Edge and Internet Explorer do not work properly.//
17 +
16 16  [[https:~~/~~/www.youtube.com/watch?v=H8CLZ7bp0eI>>url:https://www.youtube.com/watch?v=H8CLZ7bp0eI]]
17 17  
18 18  === Processor Setup and Program Load (Per Processor) ===
... ... @@ -23,7 +23,7 @@
23 23  * Double click the PUF to install ShowRunner (works best with Toolbox closed)
24 24  * Select the PUF file again if needed, connect to the processor using the pencil, and select Recheck (This verifies the need to install the program, the XPanel UI, and the Crestron App UI)
25 25  * Click Update when prompted to install ShowRunner
26 -* After loading, you can connect to the UI by na vigating to the processor’s IP using any internet browser that supports Adobe Flash (Adobe Flash is required for Crestron’s xPanel)
28 +* After loading, you can connect to the UI by navigating to the processor’s IP using any internet browser that supports Adobe Flash (Adobe Flash is required for Crestron’s xPanel)
27 27  ** If only a white screen is shown, navigate to “http:~/~/(ProcessorIpAddress)/core3xpanel.html” to force the UI path
28 28  * ShowRunner will be loaded but a configuration and license are still needed.  Please proceed with the next section.
29 29  
... ... @@ -45,7 +45,6 @@
45 45  *** The program will restart
46 46  * Wait about 45 seconds after loading the configuration for the program to restart completely
47 47  
48 -
49 49  === TSW Setup (Per Panel) ===
50 50  
51 51  * Set the TSW’s IP Address per your network requirements
... ... @@ -53,7 +53,6 @@
53 53  * When finished, connect to the TSW with Text Console and type “addm 10 x.x.x.x” to link the panel to the processor (where x.x.x.x is the processor’s IP or hostname [DHCP/DNS])
54 54  ** You can also edit the IP table from Toolbox or the touchpanel’s setup screen.  IP-IDs 10 and 11 are reserved for TSWs by default.  If you have more than 2 touchpanels the additional IP-IDs will be provided.
55 55  
56 -
57 57  === GLPAC Setup ===
58 58  
59 59  * When GLPACs are deployed Chief Integrations will provide a load script that loads and configures the GLPAC hardware.  The script includes Chief Integrations chosen IP addresses unless otherwise requested.