Skip to Content
Last modified by Alexander Mott on 2023/11/29 22:53
Show last authors
1 Sometimes, ZUMNET-JBOXs or ZUMLINK-* devices will report as an "UNDEFINED" model type when queried in Network Device Tree view or using the "ppndiscover" Text Console Command.
2
3 In this case, it is necessary to connect to the ZUMNET-JBOX and run a specific text console command to correct the device.
4
5 The command to run takes the format: ##rcon [netID].[CID] setmodel [modelNumber]##
6
7 Once the command has been run, reboot the ZUMNET-JBOX using the ##reboot## command. Refer to the table below for the [modelNumber] for each device. The [netID] for all ZUMNET-JBOXs is "1". ZUMLINK devices landed on Net 2 of a DIN-CENCN-2 will require a [netID] of "2", while ZUMLINK devices landed directly on a processor will not have a [netID].
8
9 For example, a ZUMLINK-DT-QUATTRO-DLS at CID 05 reporting as a ZUMLINK-OCC-VAC-UNDEFINED-DLS should be corrected with the command: ##rcon 1.5 setmodel 3##
10
11 (% class="table-condensed" %)
12 |**Undefined Model**|**Correct Model**|**Model Number**
13 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-IR-QUATTRO-DLS|1
14 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-IR-QUATTRO-HD-DLS|2
15 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-DT-QUATTRO-DLS|3
16 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-QUATTRO-DLS|4
17 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-ONEWAY-DLS|5
18 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-HALLWAY-DLS|6
19 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-IR-QUATTRO-DLS-RLY|7
20 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-IR-QUATTRO-HD-DLS-RLY|8
21 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-DT-QUATTRO-DLS-RLY|9
22 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-QUATTRO-DLS-RLY|10
23 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-ONEWAY-DLS-RLY|11
24 |ZUMLINK-OCC-VAC-UNDEFINED-DLS|ZUMLINK-US-HALLWAY-DLS-RLY|12
25 |ZUMNET-UNDEFINED|ZUMNET-JBOX-16A-LV|1
26 |ZUMNET-UNDEFINED|ZUMNET-JBOX-DALI|2
27 |ZUMLINK-UNDEFINED|ZUMLINK-JBOX-16A-LV|3
28 |ZUMLINK-UNDEFINED|ZUMLINK-JBOX-20A-SW|4
29 |ZUMLINK-UNDEFINED|ZUMLINK-JBOX-20A-PLUG|5