Skip to Content
Last modified by Alexander Mott on 2022/09/20 17:22
From version 4.1
edited by Craig Lewis
on 2020/05/15 16:36
Change comment: There is no comment for this version
To version 5.1
edited by Alexander Mott
on 2020/05/15 16:42
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.craig\.lewis@chiefintegrations\.com
1 +XWiki.alexander\.mott@chiefintegrations\.com
Content
... ... @@ -8,7 +8,7 @@
8 8  
9 9  === Detailed Analysis ===
10 10  
11 -The below measurements were taken with GLA-IR-QUATTRO-HD-COM1-24 attached to a GLPP-1DIMFLV2CN-PM with ~~1’ of wire using a Pokit portable oscilloscope in line to capture the current.  The initial soft start (~~50ms) is followed by full operation which draws ~~20mA.  20mA average consumption is fairly stable for the remainder of the sensor’s runtime.  Similar measurements were obtained with a Fluke 189 DMM so we know this Pokit capture is accurate.  Alternative measurements were taken with an HP 6632A DC power supply as the 24VDC power source and similar readings were produced and confirmed by the power supply’s internal meter.
11 +The below measurements were taken with GLA-IR-QUATTRO-HD-COM1-24 attached to a GLPP-1DIMFLV2CN-PM with ~~1’ of wire using a Pokit portable oscilloscope in line to capture the current.  On startup, the sensor briefly draws 60mA before dropping to ~~20mA after 50ms.  20mA average consumption is fairly stable for the remainder of the sensor’s runtime.  Similar measurements were obtained with a Fluke 189 DMM so we know this Pokit capture is accurate.  Alternative measurements were taken with an HP 6632A DC power supply as the 24VDC power source and similar readings were produced and confirmed by the power supply’s internal meter.
12 12  
13 13  
14 14  [[image:image-20200515092057-1.png]]