Last modified by Alexander Mott on 2023/12/13 19:15
From version 8.1
edited by Alexander Mott
on 2023/03/29 21:29
Change comment: There is no comment for this version
To version 10.1
edited by Alexander Mott
on 2023/03/29 21:55
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,7 +6,7 @@
6 6  (((
7 7  SHOWRUNNER™ provides a number of benefits over using the default program. These benefits are covered in detail on our [[Crestron Zūm Wired and SHOWRUNNER™>>doc:Design Guide.Hardware Design Guide.Crestron Zum Wired.Crestron Zum Wired Overview.WebHome]], but one of the largest benefits are the tools included with SHOWRUNNER™ to make Zūm Wired start-ups go as smoothly as possible.
8 8  
9 -= App Mode Zūm Discovery =
9 += App Mode (Zūm Discovery) =
10 10  
11 11  (% class="box errormessage" %)
12 12  (((
... ... @@ -16,7 +16,7 @@
16 16  SHOWRUNNER™ includes a Zūm Wired Discovery feature that makes it easy to import Zūm Rooms that have been configured in App Mode into an existing SHOWRUNNER™ configuration. The process for starting up a system using this method is the same as starting up any other networked installation in App Mode, but with the added steps of installing SHOWRUNNER and importing Zūm Rooms into the configuration.
17 17  Installing SHOWRUNNER™ on different processors is covered in our [[startup pages>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.WebHome]], while importing Zūm Rooms is covered in the [[Zūm Wired Discovery>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Zūm Discovery.WebHome]] page.
18 18  
19 -= Start-Up Guide =
19 += CNET Mode (SHOWRUNNER™ Total Control) =
20 20  
21 21  Lorem
22 22  
... ... @@ -69,4 +69,15 @@
69 69  ** set up schedule, etc.
70 70  * once done, save and back up configuration file
71 71  )))
72 +
73 += Tools for Statically Configured Lighting Networks =
74 +
75 +Unlike installations using the default program, SHOWRUNNER™ offers the opportunity to reduce the cost of hardware by enabling the use of any 3 or 4-Series processor, rather than being restricted to using the ZUM-HUB4 exclusively. Some of these other processors (DIN-AP4, RMC4, etc.) do not include a Control Subnet with built-in router, which requires the use of static IP addresses if the lighting network is to remain independent and there is no router specified to manage traffic on the lighting network. SHOWRUNNER™ includes several built-in features to assist with these sort of startups without requiring a Technician to bring their own router.
76 +
77 +This section does not apply to processors with a built in Control Subnet (CP4N, AV4, PRO4, ZUM-HUB4, etc.) or lighting networks that are fully integrated with a managed building LAN.
78 +
79 +The steps for statically configuring a networked Zūm Wired installation with SHOWRUNNER™ are:
80 +
81 +1. [[Configure the static IP address>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.Webhome||anchor="HIPConfiguration"]] for the processor and [[install SHOWRUNNER™>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.Processor Setup.Webhome||anchor="HProgramLoad"]]
82 +1. [[dhcp>>doc:SHOWRUNNER™ Setup Guide.Troubleshooting Guide.Advanced Tools.DHCP Server.WebHome]]
72 72  )))