Last modified by Alexander Mott on 2023/12/13 19:15
From version 6.3
edited by Alexander Mott
on 2023/03/29 21:20
Change comment: (Autosaved)
To version 5.1
edited by Alexander Mott
on 2023/03/28 17:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,24 +1,22 @@
1 -({{box cssClass="floatinginfobox" title="**CONTENTS**"}}
2 -{{toc/}}
3 -{{/box}}
4 -
5 -(% class="row" %)
1 +(% class="box errormessage" %)
6 6  (((
7 -SHOWRUNNER™ provides
3 +n/a
4 +)))
8 8  
9 -https://wiki.chiefintegrations.com/Design%20Guide/Hardware%20Design%20Guide/Crestron%20Zum%20Wired/Crestron%20Zum%20Wired%20Overview/
10 -
11 -= App Mode Zūm Discovery =
12 -(% class="box errormessage" %)
6 +(% class="box warningmessage" %)
13 13  (((
14 -WARNING: Cresnet Discovery is not currently working on ZUMNET-JBOXs. Crestron has acknowledged a fix has been sent to QE. Discovery must be fixed before SHOWRUNNER™ can auto-discover hardware.
8 +n/a
15 15  )))
16 -SHOWRUNNER™ includes a Zūm Wired Discovery feature that makes it easy to import Zūm Rooms that have been configured in App Mode into an existing SHOWRUNNER™ configuration. The process for starting up a system using this method is the same as starting up any other networked installation in App Mode, but with the added steps of installing SHOWRUNNER and importing Zūm Rooms into the configuration.
17 -Installing SHOWRUNNER™ onto various processors is covered on our [[startup pages>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Zūm Discovery.WebHome]], while importing rooms is covered on the [[Zūm Wired Discovery>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.Device Addressing.Zūm Discovery.WebHome]] page.
18 18  
19 -https://wiki.chiefintegrations.com/SHOWRUNNER%E2%84%A2%20Setup%20Guide/SHOWRUNNER%E2%84%A2%20Installation%20Guide/SHOWRUNNER%E2%84%A2%20Installation%20and%20Network%20Setup/
11 +{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
12 +{{toc/}}
13 +{{/box}}
20 20  
21 -= (SHOWRUNNER™ Complete Control) =
15 +(% class="row" %)
16 +(((
17 +Lorem
18 +See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details.
19 +See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details.
22 22  
23 23  = Start-Up Guide =
24 24  
... ... @@ -49,22 +49,14 @@
49 49  ** will take up to several minutes per room, but will be able to do up to 10 rooms simultaneously
50 50  ** devices will reboot, possibly multiple times
51 51  ** check loadscript manager for any failures and re-run script for those devices if necessary (a rebooting zumnet box will temporarily disrupt online status for downstream zumnet jboxs and potentially interrupt the firmware update)
52 -* run device discovery again to confirm that all zumnet boxes were updated
53 -** zumnet boxes update last, so if a zumnet jbox is updated then this means that all of the zumlink devices that were online have also been updated
54 -* if app mode backup is desired, configure the boxes using the app now
55 55  * run "ip config (def. hostname)" loadscript to update device IP-IDs and hostnames
56 56  ** devices will reboot
57 57  ** devices will now have new hostnames, so any further loadscripts should use (new hostname) versions
58 -* run "cnet mode (def. hostname)" loadscript to put devices into CNET mode
59 -** if app mode backup is desired, also run "autoswitch enable (def. hostname)" loadscript
60 -** devices will reboot
61 61  * if using a processor without control subnet, run the "static ip config (new hostname)" script
62 62  ** this loadscript is necessary, as the showrunner DHCP server is only intended for commissioning. It must always be manually started after program restart and should not be used in production
63 63  ** (**will probably need a lot of extra steps + alterations to how we make configs since static IPs require a lot more information as well as corresponding modifications to SrConfig.json**)
64 64  * once done, commission job essentially as normal showrunner job
65 65  ** (**sr commissioning guide is incomplete**)
66 -** connect to each zumnet jbox and address zumlink devices per the takeoff
67 -*** if devices are not online, then troubleshoot why and update firmware through device tree view once they are online
68 68  ** occ timeouts can be adjusted through UI; other settings (ie reach) should be adjusted through app
69 69  ** photocells etc are set up through UI
70 70  ** loads teseted and verified through UI; can be moved around between controllers as necessary
... ... @@ -71,6 +71,5 @@
71 71  *** loads don't need to be in the same room as the zumnet that controls them
72 72  ** keypads can use standard SR types or be fully customized
73 73  ** set up schedule, etc.
74 -* once done, save and back up configuration file
75 75  )))
76 76  )))