Last modified by Alexander Mott on 2023/12/13 19:15
From version 5.1
edited by Alexander Mott
on 2023/03/28 17:50
Change comment: There is no comment for this version
To version 4.1
edited by Alexander Mott
on 2023/03/28 15:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Hidden
... ... @@ -1,1 +1,1 @@
1 -true
1 +false
Content
... ... @@ -27,7 +27,6 @@
27 27  cross reference/update to old [[zumnet startup>>doc:SHOWRUNNER™ Setup Guide.SHOWRUNNER™ Installation Guide.SHOWRUNNER™ Installation and Network Setup.ZUMNET-JBOX Setup.WebHome]]?
28 28  
29 29  basic steps:
30 -
31 31  * configure your processor per chief's startup guide
32 32  * get all zumnet jbox online
33 33  ** use built in dhcp from processor control subnet
... ... @@ -53,13 +53,5 @@
53 53  * if using a processor without control subnet, run the "static ip config (new hostname)" script
54 54  ** this loadscript is necessary, as the showrunner DHCP server is only intended for commissioning. It must always be manually started after program restart and should not be used in production
55 55  ** (**will probably need a lot of extra steps + alterations to how we make configs since static IPs require a lot more information as well as corresponding modifications to SrConfig.json**)
56 -* once done, commission job essentially as normal showrunner job
57 -** (**sr commissioning guide is incomplete**)
58 -** occ timeouts can be adjusted through UI; other settings (ie reach) should be adjusted through app
59 -** photocells etc are set up through UI
60 -** loads teseted and verified through UI; can be moved around between controllers as necessary
61 -*** loads don't need to be in the same room as the zumnet that controls them
62 -** keypads can use standard SR types or be fully customized
63 -** set up schedule, etc.
64 64  )))
65 65  )))