Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 14.4
edited by Alexander Mott
on 2023/03/27 19:08
Change comment: (Autosaved)
To version 14.1
edited by Alexander Mott
on 2023/03/24 20:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -110,20 +110,7 @@
110 110  
111 111  Lorem
112 112  
113 -= Hardware Design Limitations =
113 += Device Count Limitations =
114 114  
115 -There are a handful of limitations to keep in mind when designing Zūm Wired systems, with different restrictions applying to Zūm Net and Zūm Link:
116 -
117 -Zūm Net limitations:
118 -
119 -* Do not exceed 100m or 328' between subsequent ZUMNET-JBOX-* devices, or between the first ZUMNET-JBOX and the network switch
120 -* Do not exceed 20 ZUMNET-JBOX-* devices on a single run of Zūm Net
121 -* Do not "loop" Zūm Net cables (i.e., cables should start at the network switch and end at the last ZUMNET-JBOX, without a returning cable from the last device back to the switch)
122 -
123 -Zūm Link limitations:
124 -
125 -* Do not exceed 31 ZUMLINK-* and Cresnet devices on a single ZUMNET-JBOX-* device
126 -* Do not exceed 2 ZUMLINK-OCC-* sensors or non-system sensors per ZUMNET/ZUMLINK-JBOX-* room
127 -** Each ZUMNET/ZUMLINK-JBOX-* is limited to 24 V, 85 mA output shared across their Zūm Link ports and sensor inputs
128 -** Power is said to be additive between boxes,
115 +Lorem
129 129  )))