Changes for page **General Overview and Design Considerations

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,29 +10,20 @@
10	10
11	11	= System Overview and Hardware Modes =
12	12
13		-Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
	13	+Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party/non-system presence detectors, 0-10V photocells
14	14
15		-== App Mode ==
	15	+== CNET Mode ==
16	16
17	17	Lorem
18	18
19		-== CNET Mode ==
	19	+== App Mode ==
20	20
21	21	Lorem
22	22
23		-== Primary vs Secondary Mode ==
	23	+== Primary vs Secondary ==
24	24
25		-(% class="box infomessage" %)
26		-(((
27		-Note that prior to .puf firmware v1.03.27 (device firmware v1.002.00026), these were referred to as "master" and "slave" mode. As of February, 2023, ZUMNET-JBOX-* are still shipping on this older firmware, and so the older commands must be used to initially change the mode prior to updating device firmware.
28		-)))
	25	+Lorem
29	29
30		-ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller. As of February, 2023, ZUMNET-JBOX-*
31		-
32		-* In Primary
33		-
34		-While in secondary mode, the ZUMNET-JBOX-* acts as if it were cannot detect any devices on its
35		-
36	36	== Security ==
37	37
38	38	Lorem