Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 10.8
edited by Alexander Mott
on 2023/03/24 18:52
Change comment: (Autosaved)
To version 1.1
edited by Alexander Mott
on 2023/03/24 16:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,18 +4,27 @@
1 -{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
2 -{{toc/}}
3 -{{/box}}
4 4  
2 +(% class="box errormessage" %)
3 +(((
4 +n/a
5 +)))
6 +(% class="box warningmessage" %)
7 +(((
8 +n/a
9 +)))
10 +
5 5  (% class="row" %)
6 6  (((
7 -Crestron Zūm Wired is a distributed lighting control system that has various global and local control options. Zūm Wired uses industry standard dimming protocols (DALI, 0-10V, and phase dimming) and advanced sensors to provide automated control of a building or facility's lighting. With certain designs, it is also possible to integrate control over DMX fixtures, building management systems, and other third-party devices (such as motorized shades and HVAC).
13 +(% class="col-xs-12 col-sm-8" %)
14 +(((
15 +Lorem
8 8  
9 -The purpose of this article is to explain various important concepts that must be understood in order to design a system that meets the requirements of all project stakeholders.
17 +See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details.
18 +See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details.
10 10  
11 -= System Overview and Hardware Modes =
20 += Overview =
12 12  
13 -Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
22 +Lorem
14 14  
15 -== App Mode ==
24 += Hardware Modes =
16 16  
17 17  Lorem
18 18  
... ... @@ -20,54 +20,47 @@
20 20  
21 21  Lorem
22 22  
23 -== Primary vs Secondary Mode ==
32 +== App Mode ==
24 24  
25 -ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller.
26 -
27 -Note that on older versions of firmware, these modes were referred to as "master" and "slave" mode. The terminology was updated in .puf v1.03.27 (device firmware v1.002.00026), but as of February, 2023 the FW
28 -
29 -== Security ==
30 -
31 31  Lorem
32 32  
33 -= Control Paradigms =
36 +== Primary vs Secondary ==
34 34  
35 -Designs for Zūm Wired systems are broadly categorized as either "standalone" or "networked" designs. Both standalone and networked systems should be designed with one ZUMNET-JBOX-* per room or logical control space connected to a number of ZUMLINK-* devices within that same space. In networked systems, there is also a control processor which provides centralized control of the entire system. ZUMNET-JBOX-* must be daisy-chained together with Zūm Net and then connected back to the processor. In standalone applications, there is no processor and no Zūm Net cabling connecting different rooms to each other.
36 -
37 -
38 -The difference between the two is that in a networked system there will be Zūm Net cabling connecting each ZUMNET-JBOX-*
39 -
40 -In standalone applications, each room has one ZUMNET-JBOX-* with a number of connected ZUMLINK-* devices. There is no Zūm Net connecting different rooms,
41 -
42 -Networked systems can be further subdivided into "Networked with Default Program" or "Networked with Custom Program".
43 -
44 -Depending on which control paradigm is selected, there will be various impacts to the hardware cost, start-up cost, start-up complexity, ease of maintenance, control capabilities, integration with third-party systems, available user interfaces, and the ability to meet a provided sequence of operations.
45 -
46 -== Standalone ==
47 -
48 48  Lorem
49 49  
50 -== Networked ==
40 += Standalone vs Networked =
51 51  
52 -Lorem
42 +== Start-Up Considerations ==
53 53  
54 -=== Networked with Default Program ===
55 -
56 56  Lorem
57 57  
58 -=== Networked with SHOWRUNNER™ ===
46 += Processor Selection for Networked Systems =
59 59  
60 60  Lorem
61 61  
62 -== Start-Up Considerations ==
50 += Device Count Limitations =
63 63  
64 -Lorem
52 +Lorem
65 65  
66 -== Processor Selection for Networked Systems ==
54 +)))
67 67  
68 -Lorem
69 69  
70 -= Device Count Limitations =
57 +(% class="col-xs-12 col-sm-4" %)
58 +(((
59 +{{box title="**CONTENTS**"}}
60 +{{toc/}}
61 +{{/box}}
71 71  
72 -Lorem
63 +(% class="wikigeneratedid" id="HFigure1" %)
64 +(((
65 +[[image:Templates.Article.Template.WebHome@image1.jpg]]
66 +//Figure 1: [[Sea>>https://commons.wikimedia.org/wiki/File:Isle_of_Icacos_II.jpg]]//
73 73  )))
68 +
69 +(% class="wikigeneratedid" id="HFigure2" %)
70 +(((
71 +[[image:Templates.Article.Template.WebHome@image2.jpg]]
72 +//Figure 2: [[Waves>>https://commons.wikimedia.org/wiki/File:Culebra_-_Playa_de_Flamenco.jpg]]//
73 +)))
74 +)))
75 +)))
image1.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.MarkKohlmann
Size
... ... @@ -1,0 +1,1 @@
1 +43.8 KB
Content
image2.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.MarkKohlmann
Size
... ... @@ -1,0 +1,1 @@
1 +40.0 KB
Content