Changes for page **General Overview and Design Considerations

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -10,20 +10,29 @@
10	10
11	11	= System Overview and Hardware Modes =
12	12
13		-Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party/non-system presence detectors, 0-10V photocells
	13	+Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
14	14
15		-== CNET Mode ==
	15	+== App Mode ==
16	16
17	17	Lorem
18	18
19		-== App Mode ==
	19	+== CNET Mode ==
20	20
21	21	Lorem
22	22
23		-== Primary vs Secondary ==
	23	+== Primary vs Secondary Mode ==
24	24
25		-Lorem
	25	+(% class="box infomessage" %)
	26	+(((
	27	+Note that prior to .puf firmware v1.03.27 (device firmware v1.002.00026), these were referred to as "master" and "slave" mode. As of February, 2023, ZUMNET-JBOX-* are still shipping on this older firmware, and so the older commands must be used to initially change the mode prior to updating device firmware.
	28	+)))
26	26
	30	+ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller. As of February, 2023, ZUMNET-JBOX-*
	31	+
	32	+* In Primary
	33	+
	34	+While in secondary mode, the ZUMNET-JBOX-* acts as if it were cannot detect any devices on its
	35	+
27	27	== Security ==
28	28
29	29	Lorem