Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 10.7
edited by Alexander Mott
on 2023/03/24 18:47
Change comment: (Autosaved)
To version 10.8
edited by Alexander Mott
on 2023/03/24 18:52
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -10,20 +10,22 @@
10 10  
11 11  = System Overview and Hardware Modes =
12 12  
13 -Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party/non-system presence detectors, 0-10V photocells
13 +Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
14 14  
15 -== CNET Mode ==
15 +== App Mode ==
16 16  
17 17  Lorem
18 18  
19 -== App Mode ==
19 +== CNET Mode ==
20 20  
21 21  Lorem
22 22  
23 -== Primary vs Secondary ==
23 +== Primary vs Secondary Mode ==
24 24  
25 -Lorem
25 +ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller.
26 26  
27 +Note that on older versions of firmware, these modes were referred to as "master" and "slave" mode. The terminology was updated in .puf v1.03.27 (device firmware v1.002.00026), but as of February, 2023 the FW
28 +
27 27  == Security ==
28 28  
29 29  Lorem