Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 10.11
edited by Alexander Mott
on 2023/03/24 19:07
Change comment: (Autosaved)
To version 10.3
edited by Alexander Mott
on 2023/03/24 18:27
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -4,43 +4,40 @@
4 4  
5 5  (% class="row" %)
6 6  (((
7 -Crestron Zūm Wired is a distributed lighting control system that has various global and local control options. Zūm Wired uses industry standard dimming protocols (DALI, 0-10V, and phase dimming) and advanced sensors to provide automated control of a building or facility's lighting. With certain designs, it is also possible to integrate control over DMX fixtures, building management systems, and other third-party devices (such as motorized shades and HVAC).
7 +Crestron Zūm Wired is a distributed lighting control platform that utilizes advanced sensors and industry standard dimming protocols to provide automated control of a building's lighting.
8 8  
9 -The purpose of this article is to explain various important concepts that must be understood in order to design a system that meets the requirements of all project stakeholders.
10 10  
11 -= System Overview and Hardware Modes =
12 12  
13 -Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
14 14  
15 -== App Mode ==
16 16  
17 -Lorem
18 18  
19 -== CNET Mode ==
20 20  
21 -Lorem
22 22  
23 -== Primary vs Secondary Mode ==
24 24  
25 -(% class="box infomessage" %)
17 +(% class="box warningmessage" %)
26 26  (((
27 -Note: the terminology used for these modes was modified in .puf firmware v1.03.27 (device firmware v1.002.00026). Hardware delivered with older firmware will require the use of different commands to change modes during start-up.
19 +Add more to intro
28 28  )))
29 29  
30 -ZUMNET-JBOX-* devices can be set to be either the Primary room controller or a Secondary load controller. There must only be one Primary ZUMNET-JBOX on a given Zūm Link bus, and in a networked system the Primary ZUMNET-JBOX is the one that should be connected to the Zūm Net. Secondary mode.
22 += Hardware Modes =
31 31  
32 -* In Primary mode, the ZUMNET-JBOX acts as the Zūm Link host, and is able to detect all connected Zūm Link devices when connected to over Zūm Net in Crestron Toolbox. If also in App mode, a ZUMNET-JBOX in Primary mode will be the logical room controller for the space, and is the device that will be connected to via the Zūm App for configuration.
33 -* In Secondary mode, the ZUMNET-JBOX acts as if it were a ZUMLINK-JBOX
24 +Lorem
34 34  
35 -As of February, 2023, all ZUMNET-JBOX-* devices ship preconfigured in Secondary mode,
26 +== CNET Mode ==
36 36  
37 -== Security ==
28 +Lorem
38 38  
30 +== App Mode ==
31 +
39 39  Lorem
40 40  
34 +== Primary vs Secondary ==
35 +
36 +Lorem
37 +
41 41  = Control Paradigms =
42 42  
43 -Designs for Zūm Wired systems are broadly categorized as either "standalone" or "networked" designs. Both standalone and networked systems should be designed with one ZUMNET-JBOX-* per room or logical control space connected to a number of ZUMLINK-* devices within that same space. In networked systems, there is also a control processor which provides centralized control of the entire system. ZUMNET-JBOX-* must be daisy-chained together with Zūm Net and then connected back to the processor. In standalone applications, there is no processor and no Zūm Net cabling connecting different rooms to each other.
40 +Designs for Zūm Wired systems can be broadly described as being either "standalone" or "networked". Both standalone and networked applications will be designed to have at least one ZUNET-JBOX-* per room with a number of connected ZUMLINK-* devices. In networked systems, there is also a control processor which provides centralized control of the entire system. This processo
44 44  
45 45  
46 46  The difference between the two is that in a networked system there will be Zūm Net cabling connecting each ZUMNET-JBOX-*