Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 10.10
edited by Alexander Mott
on 2023/03/24 19:02
Change comment: (Autosaved)
To version 10.7
edited by Alexander Mott
on 2023/03/24 18:47
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -10,29 +10,20 @@
10 10  
11 11  = System Overview and Hardware Modes =
12 12  
13 -Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
13 +Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party/non-system presence detectors, 0-10V photocells
14 14  
15 -== App Mode ==
15 +== CNET Mode ==
16 16  
17 17  Lorem
18 18  
19 -== CNET Mode ==
19 +== App Mode ==
20 20  
21 21  Lorem
22 22  
23 -== Primary vs Secondary Mode ==
23 +== Primary vs Secondary ==
24 24  
25 -(% class="box infomessage" %)
26 -(((
27 -Note: the terminology used for these modes was modified in .puf firmware v1.03.27 (device firmware v1.002.00026). Hardware delivered with older firmware will require the use of different commands to change modes during start-up.
28 -)))
25 +Lorem
29 29  
30 -ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller. As of February, 2023, ZUMNET-JBOX-*
31 -
32 -* In Primary
33 -
34 -While in secondary mode, the ZUMNET-JBOX-* acts as if it were cannot detect any devices on its
35 -
36 36  == Security ==
37 37  
38 38  Lorem