Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:37
From version 10.10
edited by Alexander Mott
on 2023/03/24 19:02
Change comment: (Autosaved)
To version 10.2
edited by Alexander Mott
on 2023/03/24 18:22
Change comment: (Autosaved)

Summary

Details

Page properties
Content
... ... @@ -4,52 +4,46 @@
4 4  
5 5  (% class="row" %)
6 6  (((
7 -Crestron Zūm Wired is a distributed lighting control system that has various global and local control options. Zūm Wired uses industry standard dimming protocols (DALI, 0-10V, and phase dimming) and advanced sensors to provide automated control of a building or facility's lighting. With certain designs, it is also possible to integrate control over DMX fixtures, building management systems, and other third-party devices (such as motorized shades and HVAC).
7 +Crestron Zūm Wired is a distributed lighting control platform that utilizes advanced sensors and industry standard dimming protocols to provide automated control of a building's lighting.
8 8  
9 -The purpose of this article is to explain various important concepts that must be understood in order to design a system that meets the requirements of all project stakeholders.
10 10  
11 -= System Overview and Hardware Modes =
12 12  
13 -Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
14 14  
15 -== App Mode ==
16 16  
17 -Lorem
18 18  
19 -== CNET Mode ==
20 20  
21 -Lorem
22 22  
23 -== Primary vs Secondary Mode ==
24 24  
25 -(% class="box infomessage" %)
17 +(% class="box warningmessage" %)
26 26  (((
27 -Note: the terminology used for these modes was modified in .puf firmware v1.03.27 (device firmware v1.002.00026). Hardware delivered with older firmware will require the use of different commands to change modes during start-up.
19 +Add more to intro
28 28  )))
29 29  
30 -ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller. As of February, 2023, ZUMNET-JBOX-*
22 += Hardware Modes =
31 31  
32 -* In Primary
24 +Lorem
33 33  
34 -While in secondary mode, the ZUMNET-JBOX-* acts as if it were cannot detect any devices on its
26 +== CNET Mode ==
35 35  
36 -== Security ==
28 +Lorem
37 37  
30 +== App Mode ==
31 +
38 38  Lorem
39 39  
34 +== Primary vs Secondary ==
35 +
36 +Lorem
37 +
40 40  = Control Paradigms =
41 41  
42 -Designs for Zūm Wired systems are broadly categorized as either "standalone" or "networked" designs. Both standalone and networked systems should be designed with one ZUMNET-JBOX-* per room or logical control space connected to a number of ZUMLINK-* devices within that same space. In networked systems, there is also a control processor which provides centralized control of the entire system. ZUMNET-JBOX-* must be daisy-chained together with Zūm Net and then connected back to the processor. In standalone applications, there is no processor and no Zūm Net cabling connecting different rooms to each other.
40 +Designs for Zūm Wired systems can be broadly described as being either "standalone" or "networked". Networked systems can be further subdivided into "Networked with Default Program" or "Networked with Custom Program".
43 43  
42 +Depending on which control paradigm is selected, there are varied impacts to cost of hardware, cost and complexity of start-up, ease of maintenance, and control capabilities.
44 44  
45 -The difference between the two is that in a networked system there will be Zūm Net cabling connecting each ZUMNET-JBOX-*
46 46  
47 47  In standalone applications, each room has one ZUMNET-JBOX-* with a number of connected ZUMLINK-* devices. There is no Zūm Net connecting different rooms,
48 48  
49 -Networked systems can be further subdivided into "Networked with Default Program" or "Networked with Custom Program".
50 -
51 -Depending on which control paradigm is selected, there will be various impacts to the hardware cost, start-up cost, start-up complexity, ease of maintenance, control capabilities, integration with third-party systems, available user interfaces, and the ability to meet a provided sequence of operations.
52 -
53 53  == Standalone ==
54 54  
55 55  Lorem