Changes for page **General Overview and Design Considerations

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,66 +4,73 @@
4	4
5	5	(% class="row" %)
6	6	(((
7		-Crestron Zūm Wired is a distributed lighting control platform that utilizes advanced sensors and industry standard dimming protocols to provide automated control of a building's lighting.
	7	+Crestron Zūm Wired is a distributed lighting control system that has various global and local control options. Zūm Wired uses industry standard dimming protocols (DALI, 0-10V, and phase dimming) and advanced sensors to provide automated control of a building or facility's lighting. With certain designs, it is also possible to integrate control over DMX fixtures, building management systems, and other third-party devices (such as motorized shades and HVAC).
8	8
	9	+The purpose of this article is to explain various important concepts that must be understood in order to design a system that meets the requirements of all project stakeholders.
9	9
	11	+= System Overview and Hardware Modes =
10	10
	13	+Zūm Wired systems consist of ZUMNET-JBOX-* room controllers and a number of connected ZUMLINK-* devices. ZUMLINK-* devices can be ZUMLINK-JBOX-* load controllers, ZUMLINK-OCC-* presence detectors, or ZUMLINK-KP-R-W keypads (wall switches). ZUMNET-JBOX-* and ZUMLINK-JBOX-* devices have additional inputs for third-party presence detectors, 0-10V analog photocells, and contact-closure local override.
11	11
	15	+== App Mode ==
12	12
	17	+Lorem
13	13
	19	+== CNET Mode ==
14	14
	21	+Lorem
15	15
	23	+== Primary vs Secondary Mode ==
16	16
17		-(% class="box warningmessage" %)
	25	+(% class="box infomessage" %)
18	18	(((
19		-Add more to intro
	27	+Note that prior to .puf firmware v1.03.27 (device firmware v1.002.00026), these were referred to as "master" and "slave" mode. As of February, 2023, ZUMNET-JBOX-* are still shipping on this older firmware, and so the older commands must be used to initially change the mode prior to updating device firmware.
20	20	)))
21	21
22		-= Control Paradigms =
	30	+ZUMNET-JBOX-* devices can be set to be either the primary room controller or a secondary load controller. As of February, 2023, ZUMNET-JBOX-*
23	23
24		-Zūm Wired systems can be designed as either standalone or networked applications.
	32	+* In Primary
25	25
26		-In standalone applications, each room has one ZUMNET-JBOX-* with a number of connected ZUMLINK-* devices. There is no Zūm Net connecting different rooms,
	34	+While in secondary mode, the ZUMNET-JBOX-* acts as if it were cannot detect any devices on its
27	27
28		-== Standalone ==
	36	+== Security ==
29	29
30	30	Lorem
31	31
32		-== Networked ==
	40	+= Control Paradigms =
33	33
34		-Lorem
	42	+Designs for Zūm Wired systems are broadly categorized as either "standalone" or "networked" designs. Both standalone and networked systems should be designed with one ZUMNET-JBOX-* per room or logical control space connected to a number of ZUMLINK-* devices within that same space. In networked systems, there is also a control processor which provides centralized control of the entire system. ZUMNET-JBOX-* must be daisy-chained together with Zūm Net and then connected back to the processor. In standalone applications, there is no processor and no Zūm Net cabling connecting different rooms to each other.
35	35
36		-=== Networked with Default Program ===
37	37
38		-Lorem
	45	+The difference between the two is that in a networked system there will be Zūm Net cabling connecting each ZUMNET-JBOX-*
39	39
40		-=== Networked with SHOWRUNNER™ ===
	47	+In standalone applications, each room has one ZUMNET-JBOX-* with a number of connected ZUMLINK-* devices. There is no Zūm Net connecting different rooms,
41	41
42		-Lorem
	49	+Networked systems can be further subdivided into "Networked with Default Program" or "Networked with Custom Program".
43	43
44		-= Standalone vs Networked Systems =
	51	+Depending on which control paradigm is selected, there will be various impacts to the hardware cost, start-up cost, start-up complexity, ease of maintenance, control capabilities, integration with third-party systems, available user interfaces, and the ability to meet a provided sequence of operations.
45	45
46		-== Start-Up Considerations ==
	53	+== Standalone ==
47	47
48	48	Lorem
49	49
50		-== Processor Selection for Networked Systems ==
	57	+== Networked ==
51	51
52	52	Lorem
53	53
54		-= Hardware Modes =
	61	+=== Networked with Default Program ===
55	55
56	56	Lorem
57	57
58		-== CNET Mode ==
	65	+=== Networked with SHOWRUNNER™ ===
59	59
60	60	Lorem
61	61
62		-== App Mode ==
	69	+== Start-Up Considerations ==
63	63
64	64	Lorem
65	65
66		-== Primary vs Secondary ==
	73	+== Processor Selection for Networked Systems ==
67	67
68	68	Lorem
69	69