Changes for page **Crestron Zūm Wired and SHOWRUNNER™

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-*Crestron Zūm Wired Overview
	1	+**Crestron Zūm Wired and SHOWRUNNER™

Content

...	...	@@ -1,3 +1,8 @@
	1	+(% class="box successmessage" %)
	2	+(((
	3	+Page for showrunner feature comparison, reasons for using showrunner, etc.; should also include information from old
	4	+)))
	5	+
1	1	(% class="box errormessage" %)
2	2	(((
3	3	n/a
...	...	@@ -8,81 +8,237 @@
8	8	n/a
9	9	)))
10	10
	16	+{{box cssClass="floatinginfobox" title="**CONTENTS**"}}
	17	+{{toc/}}
	18	+{{/box}}
	19	+
11	11	(% class="row" %)
12	12	(((
13		-(% class="col-xs-12 col-sm-8" %)
14		-(((
15	15	Lorem
16	16
17	17	See //[[Figure 1>>WebHome||anchor="HFigure1"]]// for details.
18	18	See //[[Figure 2>>WebHome||anchor="HFigure2"]]// for details.
19	19
20		-= Overview =
	27	+= The SHOWRUNNER™ Advantage =
21	21
22	22	Lorem
23	23
24		-== Control Paradigms ==
	31	+== Exclusive Features ==
25	25
26	26	Lorem
27	27
28		-== Standalone ==
	35	+== Suitable for a Range of Applications ==
29	29
30	30	Lorem
31	31
32		-== Networked ==
	39	+== Ease of Start-Up and Documentation ==
33	33
34		-Lorem
	41	+Every SHOWRUNNER™ job comes with a number of Chief Tools™ to simplify the start-up process and enable Agents and Technicians to for networked Zūm Wired systems. These tools include:
35	35
36		-=== Networked with Default Program ===
	43	+* SRTakeoff spreadsheet provides the Technician with one location to view device addresses, record serial numbers, and track any issues discovered during start-up
	44	+* Zūm Wired Load Script generator enables technicians to easily create load scripts to streamline necessary configuration tasks based on the DeviceSummary.txt generated by Toolbox
37	37
38		-Lorem
	46	+See the [[Starting Up Zūm Wired with SHOWRUNNER™>>doc:Design Guide.Hardware Design Guide.Crestron Zum Wired.Crestron Zum Wired Overview.WebHome||anchor="HStart-UpGuide"]] page for more information on starting up Zūm Wired systems with SHOWRUNNER™.
39	39
40		-=== Networked with SHOWRUNNER™ ===
	48	+== Support and Continued Development ==
41	41
42	42	Lorem
43	43
44		-= The SHOWRUNNER™ Advantage =
	52	+= Best Practices for Zūm Wired with SHOWRUNNER™ =
45	45
46		-Lorem
	54	+Though it is possible to design a Zūm Wired system to use the standard ZUM-HUB4 program and then import rooms from SHOWRUNNER™, it is not recommended as it adds the expense of a custom program without taking advantage of any of the added functionality that SHOWRUNNER™ has to offer.
47	47
48		-== Ease of Start-Up ==
	56	+Instead, to take full advantage of everything that SHOWRUNNER™ has to offer, follow these best practices:
49	49
50		-Lorem
	58	+* Design the system to use SHOWRUNNER™ as the main program
	59	+* Set ZUMNET-JBOX-* devices in CNET mode after any App-specific configurations have been made
51	51
52		-== Exclusive Features ==
	61	+Zūm
53	53
54		-Lorem
	63	+SHOWRUNNER™
55	55
56		-== Suitable for a Range of Applications ==
	65	+= Feature Comparison Tables =
57	57
58		-Lorem
	67	+== SHOWRUNNER™ vs Default Program vs Standalone ==
59	59
60		-== Support and Continued Development ==
	69	+(% class="box errormessage" %)
	70	+(((
	71	+need to verify information is up to date for this section
	72	+)))
61	61
62		-Lorem
	74	+The below table compares some SHOWRUNNER exclusive features against networked systems using the default program and standalone systems using Zūm App mode.
63	63
64		-= Feature Comparison Table =
	76	+|=Feature|=(((
	77	+**Networked**
65	65
66		-Lorem
	79	+**(**SHOWRUNNER™**)**
	80	+)))|=(((
	81	+**Networked**
	82	+
	83	+**(HUB4)**
	84	+)))|=(((
	85	+**Zūm App**
	86	+
	87	+**(Standalone)**
67	67	)))
	89	+|(% colspan="4" %)**Hardware Requirements**
	90	+|Requires ZUMNET-JBOX-*|Y|Y|N
	91	+|Requires 3 or 4-Series Control System|Y (Can use a number of different 3 and 4-Series processors)|Y (Requires ZUM-HUB4)|N
	92	+|Requires Physical Presence in Room to Change Scenes|N|TBD|Y
	93	+|Maximum Rooms|TBD|1000|N/A
	94	+|(% colspan="4" %)**User Interfaces**
	95	+|Web Browser|(((
	96	+Crestron SmartGraphics XPanel
	97	+HTML5 UI
	98	+)))|HTML5 UI|N
	99	+|iOS/Android|Y, Crestron App (Paid Upgrade) or HTML5 UI (Device Web Browser)|N|Y*
	100	+|Touchscreens (Crestron TSW series)|Y|N|N
	101	+|(% colspan="4" %)**Features**
	102	+|Scene Recall|Y|Y|Y
	103	+|Override Fade Time for Scene Recall|Y|TBD|TBD
	104	+|Scene Save|Y|TBD|Y
	105	+|Load Control|Y|TBD|Y
	106	+|Demand Response|Y|Y|N
	107	+|Enable/Disable Occupancy|Y|Y|Y
	108	+|Override Occupancy Logic|Y|TBD|N
	109	+|Override|Y|TBD|N/A
	110	+|Plug Load On/Off|Y|Y|By Hardware
	111	+|Integration with Non-Zūm Crestron Hardware|Y|N|N
	112	+|Custom Zūm Keypad Programming|Y|TBD|Y, within the limits of the hardware
	113	+|New Feature Release Cycle|Aggressive|6-12 months|6-12 months
	114	+|Room Organization|(((
	115	+Organize According to Defined Nodes, multiple levels
	116	+Categorization to Filter by Tag
	117	+)))|Category/Room|(((
	118	+N/A
	119	+)))
	120	+|Room Discovery|Automatic Discovery of ZUMNET and ZUMLINK devices (Pending)|Automatic Discovery of ZUMNET and ZUMLINK devices|N/A
	121	+|Network Topology|(((
	122	+* Flat
	123	+* Single Handoff to LAN w/ Control Subnet
	124	+(Requires CP4N/AV4/PRO4)
	125	+)))|Single Handoff to LAN w/ Control Subnet|N/A
	126	+|Network Addressing|(((
	127	+* Manual
	128	+* Customer (DHCP or Manual)
	129	+* DHCP: Control Subnet (Requires CP4N/AV4/PRO4)
	130	+)))|Control Subnet|N/A
	131	+|Firmware Updates|PUF Tool
	132	+Automatic Support on Roadmap|Automatic, Internet Connection Required|N/A
	133	+|Floorplans|Y|N|N/A
	134	+|(% colspan="4" %)**Calendar/Scheduling**
	135	+|Logic Type|Event Driven
	136	+Profile Support (Under Development)|Pattern assigned to Category|N/A
	137	+|Astronomical Clock|Y|Y, Per Category|N/A
	138	+|Holidays|Pattern|Hard Coded|N/A
	139	+|Custom Patterns|Y, Advanced Scheduler License|N|N/A
	140	+|(% colspan="4" %)**Integrations**
	141	+|A/V Integration: API|Y|Limited|N/A
	142	+|A/V Integration: Crestron EISC|Y|N|N/A
	143	+|A/V Integration: RS-232|Y|TBD|N/A
	144	+|BACNET|Y, SHOWRUNNER™ and Crestron Licenses Needed|Y|N/A
	145	+|BACNET Features|(((
	146	+Per Area Status:
	147	+Active Scene
	148	+Occupied
	149	+Occupancy Enabled
	150	+Individual Load Level
	151	+Photocell Level (per Photocell)
	152	+Plug Loads Enabled
	153	+System:
	154	+Demand Response Enabled
	155	+System Wide Override (Panic/Emergency)
	156	+~* More Features added upon request
	157	+)))|(((
	158	+Per Room Status:
	159	+Online
	160	+On
	161	+Occupied
	162	+Daylighting Active
	163	+Device Battery is Low
	164	+Plug Loads Enabled
	165	+Occupancy Sensor Enabled
	166	+Current Daylight Level
	167	+Active Scene
	168	+\\System:
	169	+Demand Response Enabled
	170	+)))|N/A
	171	+|BACNET Settings Scope
	172	+(What Points are Exposed)|Per Area|Global|N/A
	173	+|BACNET Points Supported|Depends on Crestron License and Hardware|1000|N/A
	174	+|Crestron Fusion|Y|N|N/A
	175	+|Export to Zūm Floor Hub|Y, Licensed|N/A|N/A
	176	+|GLPAC|Y|N|N/A
	177	+|System to System Link|Y|N|N/A
	178	+|Minimum ZUM-NET Firmware|(((
	179	+CNET Mode: ZUM-WIRED 1.02.10 puf
	180	+ZUM Mode: ZUM-WIRED 1.xx.xxx puf (Pending)
	181	+)))|See Crestron, expected to be v1.01|See Crestron, expected to be v1.01
	182	+|Minimum SHOWRUNNER™ Version|(((
	183	+CNET Mode: 3.016
	184	+ZUM Mode: TBD
	185	+)))|N/A|N/A
	186	+|ZWMS (Zum Wired Master/Slave Mode)|MASTER|MASTER|MASTER or SLAVE
	187	+|ZWMODE|CNET or ZUM (ZUM Support Pending official release from Crestron)|ZUM|ZUM
68	68
	189	+=== Caveats ===
69	69
70		-(% class="col-xs-12 col-sm-4" %)
71		-(((
72		-{{box title="**CONTENTS**"}}
73		-{{toc/}}
74		-{{/box}}
	191	+* Consult Chief Integrations to verify sequence of operations if there are any concerns.
	192	+* Additional caveats:
	193	+** --Occupancy status is not reported to ShowRunner when ZUMNET/ZUMLINK JBOXs come online. This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.-- Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
	194	+** --Raw Occupancy reporting does not work. A delay of 5 seconds to 5 minutes between sensor vacancy and reported vacancy to ShowRunner. ShowRunner attempts to set 30 seconds (v3.003 to v3.009) or 5 seconds (v3.010 and later) but it is not always honored. This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.-- Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
	195	+** Cresnet Discovery is not working on ZUMNET-JBOXs. Crestron has acknowledged a fix has been sent to QE. Discovery must be fixed before ShowRunner can auto-discover hardware.
75	75
76		-(% class="wikigeneratedid" id="HFigure1" %)
77		-(((
78		-[[image:Templates.Article.Template.WebHome@image1.jpg]]
79		-//Figure 1: [[Sea>>https://commons.wikimedia.org/wiki/File:Isle_of_Icacos_II.jpg]]//
80		-)))
	197	+=== FAQ: ===
81	81
82		-(% class="wikigeneratedid" id="HFigure2" %)
83		-(((
84		-[[image:Templates.Article.Template.WebHome@image2.jpg]]
85		-//Figure 2: [[Waves>>https://commons.wikimedia.org/wiki/File:Culebra_-_Playa_de_Flamenco.jpg]]//
	199	+* I want to have a single connection to the building and have all of my Crestron devices on the Control Subnet (same topology as a ZUM-FLOOR-HUB) and use ShowRunner™ Total Control?
	200	+//Use a CP4N in lieu of the ZUM-FLOOR-HUB. A DIN-AP4 is not required. Crestron can supply a DIN-EN-6X18 with CEN-SW-POE-16 and CP4N racked in a 2RU mount plus 3 DIN rails. [[See Design Details.>>doc:Design Guide.Hardware Design Guide.Crestron Zūm Wired.Design to co-locate a CP4N and CEN-SWPOE-16 in the Same DIN-EN Cabinet.WebHome]]//
	201	+* Do I need a Crestron BACnet license when using ShowRunner for BACnet integration?
	202	+//If over 50 BACnet points are needed then a license (SW-3SERIES-BACNET-50+) will be needed for each Crestron processor that will provide BACnet points to the BMS.//
	203	+
	204	+== Out-of-the-Box vs App vs Default Program vs Custom Program ==
	205	+
	206	+Below is a Feature Comparison Table taken from the v3.05.02 Zūm Wired firmware release notes.
	207	+
	208	+(% class="table-condensed" %)
	209	+|**Feature**|**Out of the Box Functionality**|(((
	210	+**Zūm App**
	211	+
	212	+**(Standalone)**
	213	+)))|(((
	214	+**Networked**
	215	+
	216	+**(HUB4)**
	217	+)))|**Custom Prog.**|**Notes**
	218	+|Keypads|Scn recall / OFF|*|*|*|Affect all load controllers excluding Plug controllers
	219	+|Presence detectors (Occ sensors)|Scn 1 / Scn 16|*|*|*|Presence detectors affect all load controllers
	220	+|Programmable scenes| |✓|*|*|
	221	+|Occupancy/Vacancy logic| |✓|*|*|
	222	+|Daylight Harvesting| |✓|*|*|J-box analog input support only, ZUMLINK- Daylight sensor via custom programming only.
	223	+|Customized Button Functions*
	224	+(Tap/Double-Tap/ Hold)| |✓|*|*|none, Off, On, Toggle, Scene 1-16, Export button to Hub
	225	+|Create a room configuration Template| |✓|*|*|
	226	+|Apply room configuration template| |✓|✓| |Identical hardware rooms required
	227	+|Universal 2-wire phase dimming up to 16A| |✓|*|*|ZUMLINK-EXP-DIMU support & Zūm App discovery/configuration
	228	+|DALI addressing, Broadcast and groups
	229	+support (Zūm Mode)| |✓|*|*|Allows control as Broadcast or 16 DALI Groups
	230	+|Device Firmware updating via Zūm APP(BLE).| |✓| | |Requires primary controller at ver. 1.2.60
	231	+|DALI addressing and DALI group support (CNET Mode)| | | |✓|Allows addressing, grouping and control of 16 Dali Groups using Simpl #, Simpl Windows
	232	+|CNET / Zūm Mode Auto Switch| | | |✓|Automatically switches from CNET to Zum Mode when control system goes offline
	233	+|Load shedding| | |✓|*|
	234	+|Global/Multi/Cross-room KP| | |✓|*|Scenes, plug load and Occupancy enable/disable
	235	+|Timeclock event triggers| | |✓|*|
	236	+|DALI Type 6 TC| | | |✓|
	237	+|DALI Type 8 TC| | | |✓|
	238	+|Touch screen| | |*|✓|Hub4 support with mirror room modules
	239	+|Shades| | | |✓|
	240	+|AV integration| | |*|✓|Hub4 support with mirror room modules
	241	+|Energy Monitoring| | | |✓|
	242	+|(((
	243	+Floor Map
	244	+
	245	+* denotes that can be used but not required to achieve functionality
	246	+)))| | |*|✓|Hub4 support with mirror room modules
86	86	)))
87		-)))
88		-)))
	248	+
	249	+