Skip to Content
Last modified by Alexander Mott on 2023/12/08 18:49
From version 22.1
edited by Alexander Mott
on 2023/12/08 18:49
Change comment: There is no comment for this version
To version 16.1
edited by Alexander Mott
on 2023/03/28 16:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -**Crestron Zūm Wired and SHOWRUNNER™
1 +*Crestron Zūm Wired and SHOWRUNNER™
Content
... ... @@ -1,8 +6,3 @@
1 -(% class="box successmessage" %)
2 -(((
3 -Page for showrunner feature comparison, reasons for using showrunner, etc.; should also include information from old
4 -)))
5 -
6 6  (% class="box errormessage" %)
7 7  (((
8 8  n/a
... ... @@ -64,13 +64,8 @@
64 64  
65 65  = Feature Comparison Tables =
66 66  
67 -== SHOWRUNNER™ vs Default Program vs Standalone ==
62 +== SHOWRUNNER ==
68 68  
69 -(% class="box errormessage" %)
70 -(((
71 -need to verify information is up to date for this section
72 -)))
73 -
74 74  The below table compares some SHOWRUNNER exclusive features against networked systems using the default program and standalone systems using Zūm App mode.
75 75  
76 76  |=Feature|=(((
... ... @@ -88,7 +88,7 @@
88 88  )))
89 89  |(% colspan="4" %)**Hardware Requirements**
90 90  |Requires ZUMNET-JBOX-*|Y|Y|N
91 -|Requires 3 or 4-Series Control System|Y (Can use a number of different 3 and 4-Series processors)|Y (Requires ZUM-HUB4)|N
81 +|Requires 3 or 4-Series Control System|Y|Y (Requires ZUM-HUB4)|N
92 92  |Requires Physical Presence in Room to Change Scenes|N|TBD|Y
93 93  |Maximum Rooms|TBD|1000|N/A
94 94  |(% colspan="4" %)**User Interfaces**
... ... @@ -186,21 +186,6 @@
186 186  |ZWMS (Zum Wired Master/Slave Mode)|MASTER|MASTER|MASTER or SLAVE
187 187  |ZWMODE|CNET or ZUM (ZUM Support Pending official release from Crestron)|ZUM|ZUM
188 188  
189 -=== Caveats ===
190 -
191 -* Consult Chief Integrations to verify sequence of operations if there are any concerns.
192 -* Additional caveats:
193 -** --Occupancy status is not reported to ShowRunner when ZUMNET/ZUMLINK JBOXs come online. This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.-- Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
194 -** --Raw Occupancy reporting does not work. A delay of 5 seconds to 5 minutes between sensor vacancy and reported vacancy to ShowRunner. ShowRunner attempts to set 30 seconds (v3.003 to v3.009) or 5 seconds (v3.010 and later) but it is not always honored. This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.-- Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
195 -** Cresnet Discovery is not working on ZUMNET-JBOXs. Crestron has acknowledged a fix has been sent to QE. Discovery must be fixed before ShowRunner can auto-discover hardware.
196 -
197 -=== FAQ: ===
198 -
199 -* I want to have a single connection to the building and have all of my Crestron devices on the Control Subnet (same topology as a ZUM-FLOOR-HUB) and use ShowRunner™ Total Control?
200 -//Use a CP4N in lieu of the ZUM-FLOOR-HUB. A DIN-AP4 is not required. Crestron can supply a DIN-EN-6X18 with CEN-SW-POE-16 and CP4N racked in a 2RU mount plus 3 DIN rails. [[See Design Details.>>doc:Design Guide.Hardware Design Guide.Crestron Zūm Wired.Design to co-locate a CP4N and CEN-SWPOE-16 in the Same DIN-EN Cabinet.WebHome]]//
201 -* Do I need a Crestron BACnet license when using ShowRunner for BACnet integration?
202 -//If over 50 BACnet points are needed then a license (SW-3SERIES-BACNET-50+) will be needed for each Crestron processor that will provide BACnet points to the BMS.//
203 -
204 204  == Out-of-the-Box vs App vs Default Program vs Custom Program ==
205 205  
206 206  Below is a Feature Comparison Table taken from the v3.05.02 Zūm Wired firmware release notes.