Changes for page **Crestron Zūm Wired and SHOWRUNNER™

Last modified by Alexander Mott on 2023/12/08 18:49

From 14.1 to 13.1 From 21.1 to 20.1

From version 20.1

edited by Alexander Mott
on 2023/03/28 19:05

Change comment: There is no comment for this version

To version 14.1

edited by Alexander Mott
on 2023/03/28 16:16

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -34,7 +34,6 @@
  == Ease of Start-Up and Documentation ==
  Every SHOWRUNNER™ job comes with a number of Chief Tools™ to simplify the start-up process and enable Agents and Technicians to for networked Zūm Wired systems. These tools include:
--
  * SRTakeoff spreadsheet provides the Technician with one location to view device addresses, record serial numbers, and track any issues discovered during start-up
  * Zūm Wired Load Script generator enables technicians to easily create load scripts to streamline necessary configuration tasks based on the DeviceSummary.txt generated by Toolbox
@@ -57,186 +57,7 @@
  SHOWRUNNER™
--= Feature Comparison Tables =
++= Feature Comparison Table =
--== SHOWRUNNER™ vs Default Program vs Standalone ==
--
--(% class="box errormessage" %)
--(((
--need to verify information is up to date for this section
++Lorem
  )))
--
--The below table compares some SHOWRUNNER exclusive features against networked systems using the default program and standalone systems using Zūm App mode.
--
--|=Feature|=(((
--**Networked**
--
--**(**SHOWRUNNER™**)**
--)))|=(((
--**Networked**
--
--**(HUB4)**
--)))|=(((
--**Zūm App**
--
--**(Standalone)**
--)))
--|(% colspan="4" %)**Hardware Requirements**
--|Requires ZUMNET-JBOX-*|Y|Y|N
--|Requires 3 or 4-Series Control System|Y (Can use a number of different 3 and 4-Series processors)|Y (Requires ZUM-HUB4)|N
--|Requires Physical Presence in Room to Change Scenes|N|TBD|Y
--|Maximum Rooms|TBD|1000|N/A
--|(% colspan="4" %)**User Interfaces**
--|Web Browser|(((
--Crestron SmartGraphics XPanel
--HTML5 UI
--)))|HTML5 UI|N
--|iOS/Android|Y, Crestron App (Paid Upgrade) or HTML5 UI (Device Web Browser)|N|Y*
--|Touchscreens (Crestron TSW series)|Y|N|N
--|(% colspan="4" %)**Features**
--|Scene Recall|Y|Y|Y
--|Override Fade Time for Scene Recall|Y|TBD|TBD
--|Scene Save|Y|TBD|Y
--|Load Control|Y|TBD|Y
--|Demand Response|Y|Y|N
--|Enable/Disable Occupancy|Y|Y|Y
--|Override Occupancy Logic|Y|TBD|N
--|Override|Y|TBD|N/A
--|Plug Load On/Off|Y|Y|By Hardware
--|Integration with Non-Zūm Crestron Hardware|Y|N|N
--|Custom Zūm Keypad Programming|Y|TBD|Y, within the limits of the hardware
--|New Feature Release Cycle|Aggressive|6-12 months|6-12 months
--|Room Organization|(((
--Organize According to Defined Nodes, multiple levels
--Categorization to Filter by Tag
--)))|Category/Room|(((
--N/A
--)))
--|Room Discovery|Automatic Discovery of ZUMNET and ZUMLINK devices (Pending)|Automatic Discovery of ZUMNET and ZUMLINK devices|N/A
--|Network Topology|(((
--* Flat
--* Single Handoff to LAN w/ Control Subnet
--(Requires  CP4N/AV4/PRO4)
--)))|Single Handoff to LAN w/ Control Subnet|N/A
--|Network Addressing|(((
--* Manual
--* Customer (DHCP or Manual)
--* DHCP: Control Subnet (Requires CP4N/AV4/PRO4)
--)))|Control Subnet|N/A
--|Firmware Updates|PUF Tool
--Automatic Support on Roadmap|Automatic, Internet Connection Required|N/A
--|Floorplans|Y|N|N/A
--|(% colspan="4" %)**Calendar/Scheduling**
--|Logic Type|Event Driven
--Profile Support (Under Development)|Pattern assigned to Category|N/A
--|Astronomical Clock|Y|Y, Per Category|N/A
--|Holidays|Pattern|Hard Coded|N/A
--|Custom Patterns|Y, Advanced Scheduler License|N|N/A
--|(% colspan="4" %)**Integrations**
--|A/V Integration: API|Y|Limited|N/A
--|A/V Integration: Crestron EISC|Y|N|N/A
--|A/V Integration: RS-232|Y|TBD|N/A
--|BACNET|Y, SHOWRUNNER™ and Crestron Licenses Needed|Y|N/A
--|BACNET Features|(((
--Per Area Status:
--Active Scene
--Occupied
--Occupancy Enabled
--Individual Load Level
--Photocell Level (per Photocell)
--Plug Loads Enabled
--System:
--Demand Response Enabled
--System Wide Override (Panic/Emergency)
--~* More Features added upon request
--)))|(((
--Per Room Status:
--Online
--On
--Occupied
--Daylighting Active
--Device Battery is Low
--Plug Loads Enabled
--Occupancy Sensor Enabled
--Current Daylight Level
--Active Scene
--\\System:
--Demand Response Enabled
--)))|N/A
--|BACNET Settings Scope
--(What Points are Exposed)|Per Area|Global|N/A
--|BACNET Points Supported|Depends on Crestron License and Hardware|1000|N/A
--|Crestron Fusion|Y|N|N/A
--|Export to Zūm Floor Hub|Y, Licensed|N/A|N/A
--|GLPAC|Y|N|N/A
--|System to System Link|Y|N|N/A
--|Minimum ZUM-NET Firmware|(((
--CNET Mode: ZUM-WIRED 1.02.10 puf
--ZUM Mode: ZUM-WIRED  1.xx.xxx puf (Pending)
--)))|See Crestron, expected to be v1.01|See Crestron, expected to be v1.01
--|Minimum SHOWRUNNER™ Version|(((
--CNET Mode: 3.016
--ZUM Mode: TBD
--)))|N/A|N/A
--|ZWMS (Zum Wired Master/Slave Mode)|MASTER|MASTER|MASTER or SLAVE
--|ZWMODE|CNET or ZUM (ZUM Support Pending official release from Crestron)|ZUM|ZUM
--
--=== Caveats ===
--* Consult Chief Integrations to verify sequence of operations if there are any concerns.
--* Additional caveats:
--** --Occupancy status is not reported to ShowRunner when ZUMNET/ZUMLINK JBOXs come online.  This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.--  Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
--** --Raw Occupancy reporting does not work.  A delay of 5 seconds to 5 minutes between sensor vacancy and reported vacancy to ShowRunner.  ShowRunner attempts to set 30 seconds (v3.003 to v3.009) or 5 seconds (v3.010 and later) but it is not always honored.  This has been acknowledged as a bug by Crestron in firmware v1.001.054 and v1.00.009 and is pending a fix from Crestron.--  Fixed in 1.02.010 firmware and Device Database 200.150.002, ShowRunner 3.016 has been updated with these fixes from Crestron.
--** Cresnet Discovery is not working on ZUMNET-JBOXs.  Crestron has acknowledged a fix has been sent to QE.  Discovery must be fixed before ShowRunner can auto-discover hardware.
--=== FAQ: ===
--* I want to have a single connection to the building and have all of my Crestron devices on the Control Subnet (same topology as a ZUM-FLOOR-HUB) and use ShowRunner™ Total Control?
--//Use a CP4N in lieu of the ZUM-FLOOR-HUB.  A DIN-AP4 is not required.  Crestron can supply a DIN-EN-6X18 with CEN-SW-POE-16 and CP4N racked in a 2RU mount plus 3 DIN rails.  [[See Design Details.>>doc:Design Guide.Hardware Design Guide.Crestron Zūm Wired.Design to co-locate a CP4N and CEN-SWPOE-16 in the Same DIN-EN Cabinet.WebHome]]//
--* Do I need a Crestron BACnet license when using ShowRunner for BACnet integration?
--//If over 50 BACnet points are needed then a license (SW-3SERIES-BACNET-50+) will be needed for each Crestron processor that will provide BACnet points to the BMS.//
--
--
--== Out-of-the-Box vs App vs Default Program vs Custom Program ==
--
--Below is a Feature Comparison Table taken from the v3.05.02 Zūm Wired firmware release notes.
--
--(% class="table-condensed" %)
--|**Feature**|**Out of the Box Functionality**|(((
--**Zūm App**
--
--**(Standalone)**
--)))|(((
--**Networked**
--
--**(HUB4)**
--)))|**Custom Prog.**|**Notes**
--|Keypads|Scn recall / OFF|*|*|*|Affect all load controllers excluding Plug controllers
--|Presence detectors (Occ sensors)|Scn 1 / Scn 16|*|*|*|Presence detectors affect all load controllers
--|Programmable scenes| |✓|*|*|
--|Occupancy/Vacancy logic| |✓|*|*|
--|Daylight Harvesting| |✓|*|*|J-box analog input support only, ZUMLINK- Daylight sensor via custom programming only.
--|Customized Button Functions*
--(Tap/Double-Tap/ Hold)| |✓|*|*|none, Off, On, Toggle, Scene 1-16, Export button to Hub
--|Create a room configuration Template| |✓|*|*|
--|Apply room configuration template| |✓|✓| |Identical hardware rooms required
--|Universal 2-wire phase dimming up to 16A| |✓|*|*|ZUMLINK-EXP-DIMU support & Zūm App discovery/configuration
--|DALI addressing, Broadcast and groups
--support (Zūm Mode)| |✓|*|*|Allows control as Broadcast or 16 DALI Groups
--|Device Firmware updating via Zūm APP(BLE).| |✓| | |Requires primary controller at ver. 1.2.60
--|DALI addressing and DALI group support (CNET Mode)| | | |✓|Allows addressing, grouping and control of 16 Dali Groups using Simpl #, Simpl Windows
--|CNET / Zūm Mode Auto Switch| | | |✓|Automatically switches from CNET to Zum Mode when control system goes offline
--|Load shedding| | |✓|*|
--|Global/Multi/Cross-room KP| | |✓|*|Scenes, plug load and Occupancy enable/disable
--|Timeclock event triggers| | |✓|*|
--|DALI Type 6 TC| | | |✓|
--|DALI Type 8 TC| | | |✓|
--|Touch screen| | |*|✓|Hub4 support with mirror room modules
--|Shades| | | |✓|
--|AV integration| | |*|✓|Hub4 support with mirror room modules
--|Energy Monitoring| | | |✓|
--|(((
--Floor Map
--
--* denotes that can be used but not required to achieve functionality
--)))| | |*|✓|Hub4 support with mirror room modules
--)))
--
--